Pressure Sprayer - 1.5L - Cellfast

Currently unavailable

Currently unavailable
The Cellfast 1.5L Pressure Sprayer is an essential tool for home gardeners and plant enthusiasts who require a reliable solution for applying fertilizers, pesticides, or routine watering. It offers the key benefit of precise application through an adjustable nozzle and extended reach, though users should note that its 1.5L capacity is best suited for small to medium-sized garden tasks rather than heavy-duty commercial applications.
| Model Part Number | 077934 |
|---|---|
| Brand | Cellfast |
It is suitable for most liquid plant fertilizers and standard pesticides, but always check the chemical manufacturer's instructions for sprayer compatibility.
Rinse the tank thoroughly with clean water, then pump clean water through the lance and nozzle until the output runs clear.
No, once the tank is pressurized, you can spray continuously until the pressure drops, at which point you will need to add a few more pumps.
Yes, by twisting the adjustable nozzle head, you can transition between a fine mist and a powerful, direct jet stream.
Yes, the aluminum lance is designed to be easily attached or removed depending on your reach requirements.
The tank has a capacity of 1.5 liters.
Check that the pump assembly is screwed on tightly and inspect the internal rubber O-ring for any tears or debris.
Unscrew the nozzle cap and rinse it under warm running water to remove potential mineral deposits or chemical clogs.
Ensure the plunger is fully seated and that the tank has not been overfilled beyond the maximum fill line.
To begin using the sprayer, fill the tank with your desired solution up to the maximum capacity line, then securely tighten the pump assembly to ensure a proper seal. Pump the handle 10-15 times to build pressure. After every use, it is critical to release the remaining pressure by gently unscrewing the pump unit once the tank is empty. Rinse the tank and the nozzle with clean water to prevent sediment from building up or chemical reactions from corroding the internal components. Always store the sprayer in a shaded, dry area to protect the plastic seals from extreme temperature fluctuations or UV degradation.