Shopping.co.uk

Turbodrive Tx Double-Countersunk Steel Wood Screw - Yellow - (Dia)6mm (L)80mm

Turbodrive Tx Double-Countersunk Steel Wood Screw - Yellow - (Dia)6mm (L)80mm

This pack of 100 yellow zinc plated double countersunk premium wood screws are constructed from du...

Best current price£11.73from B&Q

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
B&Q£11.73Visit shop

B&Q - Tx Double-Countersunk Yellow-Passivated Steel Wood Screw (Dia)6mm (L)80mmPack Of 100

Visit shop

One Offer

1 offer from £11.73

View price history by clicking the chart icon.

B&QB&Q - Tx Double-Countersunk Yellow-Passivated Steel Wood Screw (Dia)6mm (L)80mmPack Of 100
Free delivery in 1–3 days
£11.73
Visit shop

Product Information

Full details

This pack of 100 Turbodrive Tx double-countersunk wood screws is designed for DIY enthusiasts and professionals needing reliable fastening solutions for wood projects. The key benefit is their durable steel construction and double-countersunk design for a flush finish, ensuring strong, secure joints. A potential caveat is their specific diameter and length, which may not be suitable for all applications. The screws are yellow zinc-plated for corrosion resistance and feature a TX (Torx) drive for improved torque transfer and reduced cam-out.

All features

ColourYellow
BrandTurboDrive

Extended Product Information

FAQs

What type of screwdriver bit do I need for these screws?

You need a TX (Torx) drive bit that matches the size of the screw head. For these 6mm diameter screws, a T25 or T30 bit is typically required. Always check your bit set for the best fit.

Are these screws suitable for outdoor use?

The yellow zinc plating offers good corrosion resistance, making them suitable for many outdoor applications. However, for constant exposure to harsh weather or coastal environments, stainless steel screws are recommended for maximum longevity.

What is the benefit of the double-countersunk head?

The double-countersunk design allows the screw head to sit flush or even slightly below the surface of the wood, providing a cleaner, more professional finish compared to standard raised or single-countersunk heads.

How do I prevent the wood from splitting when using these screws?

It is recommended to pre-drill a pilot hole, especially in hardwoods or when screwing close to the edge of a piece of wood. The pilot hole should be slightly smaller than the screw's diameter.

What does the 'Tx' in Turbodrive Tx refer to?

'Tx' refers to the Torx drive type, a star-shaped recess in the screw head that provides excellent grip and allows for higher torque application compared to Phillips or slotted screws.

Can I use these screws for metal?

These screws are specifically designed for wood. They are not recommended for fastening metal components, as they lack the appropriate threading and strength for metal applications.

Troubleshooting

Screw head strips (cam-out)

Ensure you are using the correct size TX (Torx) bit. Apply firm downward pressure while driving. Pre-drilling the pilot hole can reduce resistance.

Screw does not drive straight

Check that the pilot hole is straight. Ensure the screw is aligned perpendicularly to the wood surface before starting to drive. Re-align if necessary.

Wood splits when driving screw

Pre-drill a pilot hole, especially near the ends of the wood or when using dense hardwoods. Ensure the pilot hole is adequately sized for the screw diameter.

Screw head doesn't sit flush

The pilot hole may be too large, or the wood is too soft. For a flush finish, ensure the pre-drilled hole allows the countersunk head to embed properly. You may need to use a countersink bit to widen the top of the pilot hole slightly.

Pros and Cons

Pros

  • Strong and durable due to steel construction.
  • Corrosion-resistant finish for extended lifespan.
  • Flush finish achieved with double-countersunk head.
  • Reduced risk of cam-out with TX drive.
  • Suitable for a wide range of DIY and professional woodworking tasks.

Cons

  • Specific size (80mm x 6mm) may not fit all projects.
  • Requires a TX (Torx) bit for driving.
  • Not suitable for use in extremely wet or corrosive environments without additional protection.
  • Can strip if over-tightened or driven into very hard materials without pre-drilling.

Setup, Compatibility & Care

Setup:

  1. Select the Correct Bit: Ensure you have a TX (Torx) screwdriver bit that matches the size of the screw head (typically a T25 or T30 for a 6mm diameter screw, check bit compatibility).
  2. Pre-drilling (Recommended): For denser woods or to prevent splitting, especially near edges, pre-drill a pilot hole slightly smaller than the screw's diameter (around 4mm for this 6mm screw). For softer woods, pre-drilling may not be necessary.
  3. Driving the Screw: Insert the screw into the pre-drilled hole or directly into the wood. Use a powered screwdriver or drill on a low torque setting, or drive manually. Apply firm, steady pressure to ensure the bit remains engaged in the TX recess.
  4. Countersinking: Drive the screw until the double-countersunk head sits flush with or just below the surface of the wood. Avoid over-tightening, which can strip the wood or damage the screw head.

Compatibility:

  • Material: Primarily designed for use in wood. Can be used in some composites or hard plastics if appropriate.
  • Tools: Requires a TX (Torx) drive bit for optimal performance. Standard Phillips or flathead drivers will not work.
  • Environments: Suitable for most indoor and protected outdoor applications due to zinc plating. For prolonged exposure to harsh weather or saltwater, consider stainless steel alternatives.

Care:

  • Storage: Store screws in a dry place to prevent premature corrosion of the zinc plating.
  • Cleaning: If screws become dirty, wipe them with a dry cloth. Avoid abrasive cleaners that could damage the finish.

Price History

DatePrice
Visit shop