Millers Oils EPP Petrol Injector Cleaner Fuel System Cleaner Treatment Additive 400ml
A maximum strength, highly concentrated cleaning agent developed to remove deposits from petrol fu...A maximum strength, highly concentrated cleaning agent developed to remove deposits from petrol fuel injection systems. Empty complete contents into fuel tank before filling to ensure thorough mixing. Suitable for all petrol engines. One bottle treats 60 litres of fuel. For severely fouled systems a double dosage may be required. Use only with other Millers Oils treatments. Store at ambient temperature and away from direct sunlight. Product efficacy within 24 months of date on bottle if stored according to manufacturer's instructions. 98% power restoration with single use. Cleans the fuel injection system. Increases fuel economy. Overcome rough engine running – stalling, poor throttle response and hesitancy due to deposits – typically overcome with one treatment. Engine emissions reduced. Emissions control equipment (catalysts) unaffected by treatment. Fuel injector eliminated. Improves torque, power or acceleration. Fuel system corrosion protection improved. Fuel/water handling characteristics improved. Fully compatible with all types of petrol – leaded, unleaded and oxygenated. Very economical treatment rates. Treatment cost repaid in improved efficiency.
Millers Oils EPP Petrol Injector Cleaner is a high-strength, concentrated fuel additive designed for petrol engines to remove deposits from fuel injection systems. It is suitable for all petrol engines and offers a significant power restoration, increased fuel economy, and improved engine running characteristics with a single treatment. The primary caveat is that it must be added to the fuel tank *before* filling to ensure thorough mixing.
All features
Model Part Number
8074VA
Brand
Millers Oils
Extended Product Information
FAQs
How often should I use Millers Oils EPP Petrol Injector Cleaner?
It is recommended for use as needed when performance issues arise or as a preventative measure every 6,000 miles (10,000 km). For severely fouled systems, a double dosage can be applied.
Can I use this product in a diesel engine?
No, this product is specifically designed for petrol engines. Millers Oils offers separate treatments for diesel systems.
What does 'double dosage' mean?
A double dosage means using two bottles of the product in a single treatment, typically for engines with significantly heavy deposit buildup.
Will this cleaner damage my catalytic converter?
No, the product is formulated to be safe for emissions control equipment, including catalytic converters.
How long does it take to see results?
Many users report improvements shortly after a single treatment, with optimal results appearing after the fuel tank has been through one or two full cycles.
What is the shelf life of the product?
If stored correctly at ambient temperature and away from direct sunlight, the product is effective for 24 months from the date indicated on the bottle.
Do I need to mix it with anything?
No, the product is ready to use. Simply add it to the fuel tank before filling with petrol.
Troubleshooting
No noticeable improvement after treatment
Ensure the full bottle was added before refueling and that adequate fuel was added to mix. For severely fouled systems, a second treatment (double dosage) might be required. Check for other underlying mechanical issues.
Engine running rougher after treatment
This can occasionally happen as deposits are dislodged. Drive the vehicle normally for a short period. If the issue persists, consult a mechanic.
Product seal is broken upon arrival
Do not use the product. Contact the retailer immediately for a replacement.
Pros and Cons
Pros
Significantly restores engine power and performance.
Enhances fuel economy and reduces running costs.
Resolves common drivability issues like hesitation and stalling.
Protects against fuel system corrosion.
Compatible with all petrol fuel types.
Economical treatment cost with a rapid return on investment through efficiency gains.
Cons
Requires careful addition before refueling for optimal mixing.
Effectiveness may vary based on the severity of system fouling.
For severely fouled systems, a double dosage might be necessary.
Should be used in conjunction with other Millers Oils treatments for best results.
Setup, Compatibility & Care
Usage Instructions:
Ensure the fuel tank is low on fuel.
Pour the entire contents of the 400ml bottle into the fuel tank.
Immediately fill the fuel tank with approximately 60 litres of petrol to ensure thorough mixing.
Compatibility:
Suitable for all petrol engines.
Fully compatible with unleaded, leaded, and oxygenated petrol.
Compatible with emissions control equipment such as catalytic converters.
Designed to be used with other Millers Oils treatments.
Storage and Shelf Life:
Store at ambient temperature.
Keep away from direct sunlight.
Product efficacy is guaranteed for 24 months from the date on the bottle if stored correctly according to manufacturer's instructions.