High Temperature Cylinder Paint - Black Satin - 250ml - Granville

This paint is ideal for exhaust systems, engine cases, and cylinder heads. Ensure that the surface is properly prepared before application.

Refer to the product label for specific drying times. Generally, allow ample time between coats and before exposing the painted surface to heat.

While designed for high-temperature applications, it is best suited for exhaust systems, engine cases, and cylinder heads.

Clean the surface thoroughly to remove any rust, grease, or loose paint. A wire brush or sandpaper can be used to prepare the surface.

It is generally recommended to apply multiple thin coats for the best results. Follow the product instructions for the recommended number of coats.

Allow the paint to dry, then lightly sand the area and reapply a thinner coat.

Clean the painted surface with mild soap and water. Avoid using abrasive cleaners.

Ensure proper surface preparation before application. Remove any existing loose paint or rust and clean the surface thoroughly before applying the paint. Multiple thin coats are recommended.

Apply the paint in thin, even coats. Avoid applying too much paint at once. If runs occur, lightly sand the area after it dries and reapply a thinner coat.

Ensure the surface is completely clean and degreased before painting. Use a degreaser if necessary. Ensure the paint is compatible with the surface material.