Best current price£31.25from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£31.25Visit shop Arp Aluminium Soffit J Trim - 40Mm X 20Mm X 3Mtr Painted
Visit shop2 offers from £31.25
View price history by clicking the chart icon.
The Aluminium Soffit J Trim is an essential component for professional contractors and DIY enthusiasts aiming for a high-quality finish on soffit installations. This profile provides a clean, polished look by concealing exposed board edges while simultaneously anchoring the soffit in place for increased stability. While it offers superior durability and a sleek aesthetic, users should ensure they have the appropriate tools for cutting aluminium to ensure precise measurements and a secure fit.
| Model Part Number | JTRIM-3-P |
|---|---|
| Brand | ARP |
The J trim is primarily used to conceal the raw, cut edges of soffit boards and provide a secure channel for the board to sit in.
This aluminium profile is rigid and intended for straight runs; it is not suitable for tight curves without specialized metal forming tools.
No, it is typically supplied without pre-drilled holes to allow the installer to place fixings exactly where the wall studs or supports are located.
Butt the two ends together as tightly as possible on a support member to create a seamless transition.
Aluminium is highly resistant to corrosion, making it a better choice than steel for coastal areas, though it should still be inspected periodically.
You will need a tape measure, a pencil for marking, a hacksaw, a drill with driver bits, and appropriate exterior-grade screws.
Use a sharp, fine-tooth hacksaw or a miter saw equipped with a non-ferrous metal blade and secure the piece with clamps to prevent vibration.
Check for any debris or internal burrs inside the trim channel; use a file to smooth the cut edges of the trim if necessary.
Ensure that the fixings are spaced no more than 400mm-600mm apart and that you have used the correct head size for the screws to ensure a flush fit.
Installation requires basic carpentry tools: a tape measure, a hacksaw or electric metal saw, and a drill with appropriate bits. Ensure the substrate is level before fixing the trim, as any inconsistencies in the wall surface will be visible once the soffit is installed.
Compatibility: This trim is designed for boards compatible with a 40mm receiving channel. Always verify your soffit board thickness matches the channel depth for a tight fit.
Care: The aluminium finish is low-maintenance. To keep it looking new, occasionally wipe the surface with a damp cloth and a mild detergent during your annual roofline inspection. Avoid using abrasive chemicals or steel wool, which may scratch the painted coating.
