Setup, Compatibility & Care
Setup:
- Clean the Glass: Thoroughly clean the glass surface with a glass cleaner to remove dirt, dust, and grease.
- Prepare the Film: Measure and cut the film to the required size, allowing a 5mm margin on all sides.
- Apply Water: Lightly spray the glass surface with water.
- Apply the Film: Peel back the backing paper little by little, and smooth the film onto the glass, moving from side to side.
- Remove Air Bubbles: Use a squeegee or a soft cloth to push out any excess water and air bubbles.
Compatibility:
D-C-Fix Onadi film is compatible with most standard glass surfaces. Avoid applying to textured or treated glass.
Care:
- Clean with a soft cloth and mild soap or glass cleaner.
- Avoid abrasive cleaners or tools that could scratch the film.