REAN - XLR Plug - 5 Pole
Best current price£10.23from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£10.23Visit shop B&Q - Rean5 Pole Xlr PlugNickel
Visit shopB&Q£10.23Visit shop All Offers
2 offers from £10.23
View price history by clicking the chart icon.
Product Information
Full details
The REAN RC5M is a professional-grade, 5-pole XLR cable mount plug designed for audio engineers, technicians, and DIY enthusiasts who require reliable, secure connections for complex signal routing. Its standout feature is the durable nickel-plated housing paired with silver-plated contacts, ensuring high conductivity and longevity in demanding environments; however, users should note that as a solder-type connector, it requires soldering experience for assembly and cable termination.
All features
| Model Part Number | RC5M |
|---|---|
| Brand | Rean |
Extended Product Information
FAQs
What is the maximum cable diameter this plug can handle?
The RC5M is designed to accommodate cable diameters ranging from 4mm to 7mm.
Are the contacts gold-plated?
No, the contacts on the REAN RC5M are silver-plated to provide high conductivity.
Can I use this for DMX lighting?
Yes, 5-pin XLR connectors are the industry standard for DMX512 lighting protocols.
Is this a solderless connector?
No, this connector uses solder terminals, requiring a soldering iron and solder for proper assembly.
What is the overall length of the connector?
The total length of the RC5M connector is 66.7mm.
Will this fit into standard 3-pin XLR female ports?
No, the pin configuration is different, and the connector will not physically mate with a 3-pin XLR jack.
Troubleshooting
Intermittent signal or crackling sounds
Check the solder joints for cold solder or loose wires and ensure the cable clamp is tightened securely to prevent movement.
Cable does not fit through the strain relief
Verify your cable diameter is within the 4mm to 7mm range; if the cable is too thick, you must use a different connector or a slimmer cable.
Connector is difficult to plug in
Inspect the pins for any misalignment caused during assembly and ensure the housing is fully tightened.
Pros and Cons
Pros
- High-quality, robust nickel construction
- Silver-plated contacts ensure excellent signal transfer
- Versatile cable diameter tolerance
- Standardized 5-pole configuration for complex setups
Cons
- Requires manual soldering for assembly
- Not suitable for solderless or field-repairable quick connections
- Specific diameter constraints mean extremely thick cables may not fit
Setup, Compatibility & Care
To assemble the RC5M, strip approximately 10mm of the outer cable jacket and prepare the individual conductors. Solder each wire carefully to the corresponding numbered terminals on the contact insert, ensuring no short circuits occur between the pins. Once the solder joints are cooled, slide the housing over the insert and tighten the cable clamp to provide strain relief. The connector is compatible with most 5-pin XLR female jacks. For maintenance, keep the silver-plated contacts free of debris and oxidation; if you notice connection drops after extensive use, use an electronic contact cleaner to restore optimal performance.