Dylon Fabric Dye Pod - Navy Blue

No, this Dylon dye pod is specifically designed for natural fabrics such as cotton, linen, and viscose. Pure synthetic fabrics will not dye at all. Fabric blends containing synthetics will only absorb the dye on their natural fibers, resulting in lighter shades.

One 350g dye pod is designed to dye up to 600g of fabric to a full, rich shade of navy blue. For lighter shades, it can be used on up to 1.8kg of fabric. For heavier items or to achieve a darker color on more fabric, consider using additional dye pods.

Yes, it is essential that the fabric you intend to dye is clean and damp before you begin the dyeing process. This ensures even dye absorption and optimal results.

For the best results and to ensure permanent color fixation, it is highly recommended to use the specified temperatures of 30°C or 40°C for both the dye cycle and the subsequent wash cycle. Deviating from these temperatures may affect the final color outcome.

When used according to the instructions, including running the recommended second wash cycle with detergent immediately after dyeing, permanent staining of your washing machine is unlikely. For extra precaution, you can run an empty cleaning cycle with detergent or a machine cleaner afterward.

The final shade can be influenced by several factors, including the fabric type, its original color, and its weight. Ensure your fabric was suitable (natural fibers) and that you did not overload the machine. For deeper colors, especially on heavier items, using more than one dye pod might be necessary.

While the dye can cover stains, the stained area might absorb the dye differently, potentially leading to an uneven or mottled appearance. Bleach marks are areas where the original color has been removed, and these will almost certainly show through the new dye as lighter spots.

Ensure the fabric was clean and evenly damp before dyeing. Avoid overloading the washing machine, as fabric needs enough room to move freely. Confirm the dye pod was placed correctly on top of the fabric, allowing even dispersal. For heavily soiled items, a pre-wash is recommended.

Verify the fabric composition; this dye is designed for natural fibers (cotton, linen, viscose). Pure synthetics will not dye, and blends will only achieve lighter shades. Ensure the correct water temperature (30°C or 40°C) was used, as lower temperatures can hinder dye absorption. Check if the fabric weight exceeded the recommended 600g for full shade or 1.8kg for lighter shades.

It is crucial to run the second wash cycle with detergent immediately after the dye cycle, as instructed. This helps to clean both the dyed fabric and the machine. If residual dye persists, run an empty hot wash cycle with a washing machine cleaner or a cup of bleach (if safe for your machine). Clean the rubber seals and detergent dispenser thoroughly.

Always wash newly dyed items separately for the first few washes until you observe no more excess dye rinsing out. Using color catcher sheets in subsequent washes can provide additional protection against color transfer to other garments.