Best current price£11.88from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£11.88Visit shop Faithfull Kango Shank Point 380Mm (914112)
Visit shop
B&Q£16.93Visit shop B&Q - Kango Shank Point 380mm (914112) Faikagp380
Visit shop11 offers from £11.88 - £22.46
View price history by clicking the chart icon.
The Faithfull Point Steel (914112) is designed for professional contractors and construction workers who require a durable, high-impact tool for heavy-duty masonry and concrete demolition. Its primary strength lies in its forged construction, offering exceptional longevity for large capacity drilling and hammer drilling machines; however, users must ensure their equipment specifically supports the 21mm Hex shank standard, as it is not compatible with standard SDS-Plus or SDS-Max power tools.
| Model Part Number | 914112 |
|---|---|
| Brand | Faithfull |
No, this is a heavy-duty tool designed specifically for large-capacity breakers with 21mm Hex shank holders.
While it can punch through wood, it is designed for masonry and concrete. Using it on wood may result in poor performance or damage to the tool tip.
This model is 380mm in total length.
Yes, we recommend using a standard hammer drill shank grease to ensure smooth operation and reduced wear on the chuck.
It means the steel has been shaped under extreme pressure, resulting in a denser, stronger tool that is less likely to snap under heavy loads compared to cast alternatives.
Verify that your machine uses a 21mm Hex shank. This tool will not fit SDS or SDS-Max chucks.
Avoid driving the steel completely into the material. Pull back slightly after each strike to allow debris to clear the hole.
Ensure the tool is fully seated in the chuck and that the locking mechanism is tightened securely.
To install, ensure your power tool is disconnected from the power source. Slide the 21mm Hex shank into the tool holder until the locking mechanism clicks or engages securely. Always ensure the tool is properly lubricated at the shank interface using a high-quality grease to prevent friction-induced heat build-up. After each use, inspect the tip for mushrooming; if the tip becomes excessively blunt, it can be re-dressed. Store in a dry environment to prevent surface corrosion and wipe away debris after every job to maintain the integrity of the shank.
