Neel Blue Turnbuckle Wire Tensioner - M6 - Stainless Steel - Hook and Eye

The hook end is designed to loop over an object or attachment point, while the eye end typically threads onto a bolt or eyelet. Both are used to connect to the system being tensioned.

Specific weight capacity is not provided, but as an M6 stainless steel turnbuckle, it is designed for medium-duty applications. Always ensure the system's total load does not exceed the weakest component's rating.

Yes, the stainless steel construction makes it highly resistant to rust and corrosion, suitable for long-term outdoor use.

The turnbuckle has a close length of 145mm and can be opened up to 217mm, providing an adjustment range of approximately 72mm.

It is suitable for various types of ropes, cables, and tie rods, including steel wire rope and synthetic ropes, provided they have compatible end fittings.

Generally, stainless steel turnbuckles do not require lubrication for normal operation. If you experience stiffness, a small amount of appropriate lubricant can be applied to the threads, but avoid over-application.

Ensure the threads are clean and free of dirt or debris. Check that the rope or cable is not twisted around the body of the turnbuckle.

Verify that the hook is securely attached to its anchor point and the eye is properly connected to its respective attachment. Ensure the turnbuckle is not over-extended beyond its maximum open length.

Confirm that the turnbuckle is rotated fully in the tightening direction. Check if the rope/cable length or anchor points are preventing further tightening. The M6 size may be insufficient for extremely high tension requirements; consider a larger gauge if applicable.