Sandtex Ultra Smooth Magnolia Masonry Paint - 10L - Beige

Drying times can vary depending on weather conditions. Generally, allow 2-4 hours for the paint to dry to touch and 16 hours for recoating.

Yes, but ensure the existing paint is sound and properly prepared by cleaning and sanding as needed.

You'll need a brush, roller, or spray equipment, along with a paint tray, stirring stick, and appropriate safety gear (gloves, eye protection).

Coverage depends on the surface and application method. A 10L can typically covers approximately 70m².

It is suitable for most exterior masonry surfaces, including brick, concrete, and render. Always check for compatibility on a small area first.

The paint comes with a 15-year guaranteed protection.

Clean brushes and rollers with water immediately after use. Dispose of waste properly.

Ensure the surface was properly prepared before painting. Remove loose paint, sand the surface, and re-apply.

Apply a second coat of paint. Ensure even application and avoid applying too much paint at once.

Ensure the correct colour has been applied and that the paint has been mixed thoroughly. Consider that the existing surface colour may affect the final result.