4 way switch box made by Kockney koi. IP66 rated and CE approved weatherproof switch boxes designe...4 way switch box made by Kockney koi. IP66 rated and CE approved weatherproof switch boxes designed for safe outdoor DIY use in ponds, gardens, boats, greenhouses and sheds, providing separate switching for appliances outside. Each unit features an illuminated switch and internal fused protection to help maintain watertight integrity without drilling into the main housing. The single switch box handles up to 1,800 watts, while the 3 way and 4 way versions include additional switches rated at 500 watts each. Suitable for cable sizes from 7mm to 12mm, these switch boxes also include a red mains supply indicator, yellow output indicator, unique wall mounting bracket and colour coded controls, with a switch life of over 50,000 cycles. Rated for use up to 2.8 kilowatt.
This Aquacadabra Kockney Koi 3-Way Weatherproof Switch Box is designed for users needing safe, external control of multiple electrical appliances in outdoor environments like ponds, gardens, boats, greenhouses, and sheds. Its key benefit is providing individual, safe switching for up to three devices with fused protection and IP66 rating. A potential caveat is understanding the wattage limitations for each switch, especially the 500W rating on the secondary switches.
All features
Model Part Number
Kockney Koi 3-Way
Brand
Aquacadabra
Extended Product Information
FAQs
What is the maximum total wattage this switch box can handle?
The unit is rated for use up to 2.8 kilowatts in total. The primary switch handles up to 1,800 watts, and each of the two secondary switches handles up to 500 watts.
Is this switch box suitable for permanent outdoor installation?
Yes, it features an IP66 rating, making it weatherproof and suitable for continuous outdoor use in various conditions.
Can I use this switch box for high-power garden equipment like a lawnmower?
The primary switch is rated for 1800W, which may be suitable for some mowers. However, the two secondary switches are limited to 500W each, which is not sufficient for most high-power garden appliances. Always check the appliance's wattage requirement.
How do I ensure the unit remains waterproof after installation?
Ensure that the cables are fed through the glands correctly and that the glands are tightened securely. All seals must be properly seated when closing the unit.
What type of fuse does it use?
The product description does not specify the fuse type, but it is internally fused for protection. Refer to the manual or inspect the unit for fuse type and rating if replacement is needed.
Can I wire multiple low-power devices to one 500W switch?
Yes, as long as the combined wattage of the devices connected to a single 500W switch does not exceed 500 watts.
Does it come with a power cable?
The product description does not mention an included power cable. It is designed to be wired directly into your existing mains supply.
Troubleshooting
Switch box does not power on.
Check the main power supply connection to the unit and ensure the circuit breaker is engaged. Verify the fuse is correctly seated and intact.
One or more switches do not activate connected appliance.
Confirm the appliance is correctly wired to the output terminals. Check the fuse for that specific switch. Ensure the appliance's power requirement does not exceed the switch's wattage rating (1800W for main, 500W for others).
Indicator lights are not working.
Verify main power is supplied. If the red mains light is off, check the power source. If yellow output lights are off, check the appliance connection and ensure the switch is activated and within its load capacity.
Water ingress detected inside the unit.
Immediately disconnect power. Inspect all cable glands and seals for damage or improper closure. Tighten glands and ensure seals are correctly positioned. Allow the unit to dry completely before restoring power. If damage is significant, replacement may be necessary.
Pros and Cons
Pros
Provides safe, independent switching for multiple outdoor appliances.
High IP66 rating ensures excellent protection against weather elements.
Integrated fused protection adds a crucial safety layer.
Clear indicator lights for power status and output.
Suitable for a range of cable sizes and outdoor environments.
Cons
Secondary switches are rated at 500W, limiting their use for high-power devices.
Requires basic DIY electrical knowledge for safe installation.
The primary 1800W switch is separate from the 500W switches, requiring careful planning for load distribution.
Setup, Compatibility & Care
Setup:
Ensure the main power supply is switched off before commencing installation.
Select a suitable location, considering accessibility and proximity to appliances.
Use the included wall mounting bracket to securely fix the switch box.
Open the unit and feed the main power cable and appliance cables through the designated glands, ensuring a snug fit to maintain the IP66 rating. The unit is designed for cable sizes between 7mm and 12mm.
Connect the main power supply to the input terminals and the appliance cables to the output terminals, observing correct polarity.
Ensure the internal fuse is correctly seated and appropriate for the connected load.
Close and secure the unit, ensuring all seals are properly seated to maintain weatherproofing.
Restore power and test each switch.
Compatibility:
Suitable for outdoor use in ponds, gardens, boats, greenhouses, and sheds.
Compatible with mains voltage wiring systems.
Maximum load: 1800 watts for the primary switch, 500 watts for each of the two secondary switches. Total connected load should not exceed 2.8 kilowatts.
Accepts cable diameters from 7mm to 12mm.
Care:
Periodically inspect the unit for any signs of damage or wear.
Clean the exterior with a damp cloth; avoid abrasive cleaners.
Ensure cable glands remain tight to maintain the weatherproof seal.
Check fuses periodically and replace with the correct rating if necessary.