Shopping.co.uk

Plumbright EndFeed Straight Tap Connector 15mm x 3/4"

Plumbright EndFeed Straight Tap Connector 15mm x 3/4"

High quality Copper End Feed capillary fittings manufactured to EN1254-1 standard with kitemark an...

Best current price£2.69from City Plumbing GB

Best offers

Shopping.co.uk recommended and popular offers

All Offers

2 offers from £2.69 - £2.80

View price history by clicking the chart icon.

City Plumbing GBPlumbright Endfeed Straight Tap Connector 15Mm X 3/4" 78104
Free delivery in 1–3 days
£2.69
Visit shop
Travis PerkinsEnd Feed Straight Tap Connector 15mm x 19mm
£30.00 delivery
£2.80
Visit shop

Product Information

Full details

This guide is for plumbers and DIY enthusiasts using the Plumbright EndFeed Straight Tap Connector. The key benefit is a cost-effective and reliable method for joining copper pipes. A neat design allows for easy installation; however, proper soldering technique is required for a leak-free joint. This guide will help you understand the features, setup, and maintenance of this product.

All features

Model Part Number78104
BrandPlumbright

Extended Product Information

FAQs

What is the standard for this fitting?

This fitting is manufactured to EN 1254-1 standard.

What is the size of the connector?

The actual size is 22 mm x 3/4 inch.

What materials is the fitting made from?

The fitting is made from grade A copper.

Is this fitting suitable for gas?

Yes, it is suitable for low-pressure domestic gas installations.

Is the copper recyclable?

Yes, the copper is fully recyclable.

What certifications does this fitting have?

It holds the British standard kitemark licence and WRAS certifications.

Where can I use this fitting?

You can use it in hot and cold water systems.

Troubleshooting

Joint leaks after soldering.

Ensure the pipe and fitting were properly cleaned and fluxed. Re-solder the joint, ensuring the solder flows evenly around the connection.

Difficulty inserting pipe into the fitting.

Make sure the pipe end is free of burrs and the fitting is clean. Use a pipe reamer to remove any imperfections on the pipe.

Pros and Cons

Pros

  • Cost-effective
  • Durable
  • Easy to install
  • Made with recyclable materials
  • WRAS approved

Cons

  • Requires soldering
  • Requires proper soldering technique

Setup, Compatibility & Care

  1. Preparation: Ensure the copper pipes are clean and free of any debris. Use a pipe cutter to make a clean, square cut.
  2. Assembly: Insert the copper pipe into the fitting. Apply flux to the pipe and fitting to ensure a good solder joint.
  3. Soldering: Heat the fitting and pipe with a blowtorch and apply solder wire to the joint. Ensure the solder flows evenly around the joint.
  4. Cooling: Allow the joint to cool completely before applying any pressure.

Compatibility: This connector is compatible with copper pipes and fittings. It is suitable for use in hot and cold water systems, as well as low-pressure domestic gas installations.

Care: Regularly inspect the joints for any signs of leaks or corrosion. If any issues are found, repair or replace the fitting as needed.

Price History

DatePrice
Visit shop