Sram Level Silver 4-Piston MTB Disc Brake - Front - 950mm Hose

No, the kit includes the lever, caliper, and hose, but rotors must be purchased separately.

Yes, the stealth lever profile is specifically designed to integrate cleanly with modern cockpits and wireless AXS setups.

Yes, the hose can be trimmed to fit your specific frame size, but you will need to re-bleed the system after cutting.

The 4-piston design provides more surface area for pad-to-rotor contact, resulting in better heat management and increased raw stopping power.

The reach adjustment is tool-free, but you will need standard shop tools (hex keys and a torque wrench) for installation and a bleed kit for maintenance.

While capable, these are categorized as trail/XC performance brakes. For heavy-duty enduro or downhill, Sram's Code series may be more appropriate.

The system likely has air trapped in the lines; perform a standard Sram hydraulic brake bleed procedure.

Loosen the caliper mounting bolts, squeeze the brake lever firmly, and re-tighten the bolts while holding the lever down to auto-center the caliper.

Clean the rotor with isopropyl alcohol and sand the brake pads lightly to remove any glazed surface buildup.