Best current price£13.43from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£13.43Visit shop Sealey Vs328 Adjustable Brake Wind-Back Adaptor - 2-Pin 3/8Insq Drive
Visit shop
B&Q£19.70Visit shop - Sealey Adjustable Brake Wind-Back Adaptor2-Pin 3/8"sq Drive Vs328
Visit shop21 offers from £13.43 - £24.53
View price history by clicking the chart icon.
The Sealey VS328 is a precision-engineered, adjustable 2-pin brake wind-back adaptor designed for automotive technicians and DIY mechanics who frequently perform brake maintenance. Its primary benefit is the ability to easily retract brake pistons, ensuring a hassle-free pad replacement process; however, users should note that it requires an existing compatible wind-back tool set (VS024, VS0244, or VS0286) to function as intended.
| Model Part Number | VS328 |
|---|---|
| Brand | Sealey |
No, the VS328 is an adaptor only and requires a compatible wind-back tool or a 3/8-inch drive ratchet.
The pins have a diameter of 4mm.
No, this model is designed specifically for 2-pin configurations. For 3-pin calipers, please refer to the Sealey VS329.
It is compatible with models VS024, VS0244, and VS0286.
It is compatible with a wide range of vehicles that use a 2-pin brake piston design, but always check your vehicle's specific caliper requirements first.
Adjust the pin spread on the adaptor to better match the specific piston notch dimensions.
Verify you are using a standard 3/8-inch drive handle or compatible Sealey wind-back base.
Ensure the tool is perfectly flush with the piston face; stop applying force if resistance is too high to avoid damaging the caliper.
To set up the VS328, ensure your brake wind-back tool is fully retracted before attaching the adaptor to the 3/8-inch square drive. Verify the pin distance matches the notches on the vehicle's brake piston before applying force.
Compatibility: This unit is specifically designed for integration with Sealey models `VS024`, `VS0244`, and `VS0286`.
Care Instructions: After every use, wipe the tool down with a clean, dry cloth to remove brake dust and debris. Periodically check the pins for signs of bending or wear. Store in a dry, cool environment to prevent corrosion.
