Best current price£23.73from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£23.73Visit shop Phoenix Contact Black/Gray Sensor/Actor Cable With Connector - 1683002
Visit shop2 offers from £23.73 - £62.16
View price history by clicking the chart icon.
This Phoenix Contact 1683002 sensor/actuator cable is designed for industrial automation and harsh environments, offering a reliable 10-meter connection between sensors/actuators and control systems. Its key benefit is the durable, halogen-free PUR jacket that withstands demanding conditions. A potential caveat is its specific M12 A-coded connector, which may limit compatibility with non-standard connections.
| Colour | Black |
|---|---|
| Model Part Number | 1683002 |
| Brand | Phoenix Contact |
PUR stands for Polyurethane, a durable plastic. "Halogen-free" means the cable jacket does not contain halogens (like chlorine or bromine), which is beneficial for safety as it produces less toxic smoke when burned.
M12 is a standard circular connector size. 'A-coding' specifies the pin configuration and is commonly used for standard sensor and actuator signals. It ensures that only compatible devices can be connected, preventing incorrect wiring.
Yes, the cable has IP65, IP67, and IP68 ratings, indicating it is protected against dust and water immersion, making it suitable for many outdoor applications when properly terminated and connected.
The cable is rated for operation between -40°C and 80°C. It can withstand higher temperatures, up to 90°C, during assembly and handling, but not for continuous operation.
The free cable end requires manual termination. You will need to strip the individual conductor insulation and connect them to the appropriate terminals in your junction box or control system, following standard electrical wiring practices.
No, this specific model (SAC4P10,0-PUR/M12FS) is listed as unshielded. For applications with high electromagnetic interference, a shielded version might be required.
The cross-sectional area of the conductors is 0.34 mm².
Ensure the M12 socket and mating connector are clean and free of debris. Verify that the A-coding matches on both connectors. Do not force the connection; it should engage smoothly.
Check the connections at both the M12 end and the terminated free end for security. Inspect the cable for visible damage. Ensure the cable is not subjected to excessive bending radius or pulling forces.
If minor damage occurs, assess if it compromises the internal conductors or IP rating. For significant damage, the cable should be replaced to prevent electrical faults or environmental ingress.
Verify that the connected device and power supply are within the cable's rated limits (250V, 4A). Ensure all connections are made correctly to prevent resistance issues.
Setup:
Compatibility:
Care:
