Gastite Instant Gasket is a silicone sealant formulated for most replacement gasket requirements. ...Gastite Instant Gasket is a silicone sealant formulated for most replacement gasket requirements. It instantly replaces pre-formed cork, felt, paper, rubber and asbestos gaskets. This sealant resists oil, water and anti-freeze, and will not crack, harden or dry out. It withstands temperatures from -60°C to + 260°C. Directions For Use: 1. Ensure surfaces are clean and dry. 2. Remove cap from tube, pierce top and fit application nozzle. 3. Apply an even bead of Instant Gasket to one side and assemble parts within 5 – 10 minutes. (Avoid over tightening the joint). 4. When fully cured, excess compound can be trimmed off with a cutting tool. 5. If joint is to be opened regularly, apply a thin film of oil to one surface before assembly. (For permanent gaskets do not apply oil) 6. Replace cap after use. Note: Not suitable for continuous fuel immersion. Instant Gasket is not suitable as a replacement for cylinder head gaskets.
Gastite Instant Gasket is a silicone sealant formulated for most replacement gasket requirements. It instantly replaces pre-formed cork, felt, paper, rubber and asbestos gaskets. This sealant resists oil, water and anti-freeze, and will not crack, harden or dry out. It withstands temperatures from -60°C to + 260°C. Directions For Use: 1. Ensure surfaces are clean and dry. 2. Remove cap from tube, pierce top and fit application nozzle. 3. Apply an even bead of Instant Gasket to one side and assemble parts within 5 – 10 minutes. (Avoid over tightening the joint). 4. When fully cured, excess compound can be trimmed off with a cutting tool. 5. If joint is to be opened regularly, apply a thin film of oil to one surface before assembly. (For permanent gaskets do not apply oil) 6. Replace cap after use. Note: Not suitable for continuous fuel immersion. Instant Gasket is not suitable as a replacement for cylinder head gaskets.