Best current price£7.99from My Motor World
Shopping.co.uk recommended and popular offers
My Motor World£7.99Visit shop Aerosol Solutions Food Lubricant Plus 400Ml
Visit shop
eBay£9.99Visit shop Food Safe Lubricant Plus H1 Approved Salt & Fresh Water Resistant 400ml
Visit shop4 offers from £7.99 - £11.99
View price history by clicking the chart icon.
This guide is for food processing professionals and industrial maintenance teams requiring a high-performance, food-safe lubricant. The key benefit is its extreme temperature resistance and water-proof qualities, ensuring reliable lubrication in harsh environments with incidental food contact. A potential caveat is its specialized nature, requiring appropriate application for optimal results. Food Lubricant Plus is an H1 approved, food-safe lubricant compliant with E.C. Regulations, designed for incidental food contact. It is resistant to hot, cold, salt, and fresh water, making it suitable for both indoor and outdoor applications. Its all-weather formulation is non-drip and non-fling, utilizing FDA and USDA approved ingredients for safety and efficacy.
| Model Part Number | ASO0404 |
|---|---|
| Brand | Aerosol Solutions |
Food Lubricant Plus is H1 approved for incidental food contact, meaning it is safe if small amounts accidentally come into contact with food during processing. It is not intended for direct, intentional food contact.
The lubricant operates effectively in a wide temperature range, from -40°C to 340°C.
Yes, this lubricant is totally resistant to salt water, making it ideal for marine or coastal food processing applications.
Reapplication frequency depends on the specific application, environmental conditions, and usage. Monitor the lubricated parts and reapply as needed to maintain optimal performance and protection.
'Non-drip' means the lubricant will not run off surfaces easily, especially vertical ones. 'Non-fling' means it will not be thrown off by centrifugal force from moving parts, ensuring it stays where applied.
Yes, it features an all-weather formulation suitable for both inside and outside applications.
While not explicitly stated, aerosol lubricants typically have a shelf life of several years when stored correctly in a cool, dry place. Check the can for any manufacturing dates if available.
Ensure the surface is clean and dry before application. Shake the can thoroughly and maintain the recommended spray distance (15-20 cm).
Invert the can and spray for a few seconds until clear propellant is discharged. If blockage persists, remove the nozzle and soak it in warm water, then dry thoroughly.
Verify that the operating temperature is within the specified range of -40°C to 340°C. Ensure the correct grade of lubricant for the specific application extreme.
Confirm the surface was properly coated and that the lubricant has had sufficient time to set. Reapply a thin, even coat, ensuring coverage on all vulnerable areas.
Setup: Shake the can well before use. Apply a thin, even coat to clean, dry surfaces. For best results, ensure the area to be lubricated is free from dirt, debris, and old grease. Hold the can approximately 15-20 cm from the surface and spray in short bursts.
Compatibility: Food Lubricant Plus is compatible with most common industrial materials. However, always test on a small, inconspicuous area first if applying to new or sensitive materials. It is designed for food processing equipment, including chains, gears, bearings, slides, and linkages where incidental food contact may occur.
Care: Store in a cool, dry place away from direct sunlight and heat sources. Ensure the nozzle is clear after each use by inverting the can and spraying briefly until only propellant emerges. Dispose of the can responsibly according to local regulations. For cleaning of equipment after application, follow standard food industry sanitation procedures. Ensure any residual lubricant is removed as per HACCP guidelines if it is not intended for continuous incidental contact.
