Bristan Prism 3 Way Diverter - Silver

The Bristan Prism 3 Way Diverter requires a minimum cavity depth of 65mm for proper installation.

The diverter features 15mm inlet and 15mm outlet connections.

Yes, it is designed to offer high performance even at low water pressures.

It is a 3-way diverter, allowing control to divert water to 2 separate outlets.

Clean with a soft, damp cloth and avoid abrasive cleaning products to maintain the silver finish.

Yes, it can be used to switch water flow between a bath filler and a shower head, for example.

Ensure there are no obstructions and that the unit was installed correctly. Check water pressure; very high pressure might make it harder to turn initially. A gentle clean might help if residue is present.

Check if the diverter is fully engaged to that outlet. Inspect the outlet connection and the connected hose/pipe for any blockages or kinks. Ensure the water pressure is adequate for both outlets.

Turn off the water supply. Check all connections for tightness. If the leak persists, the internal seals may need to be replaced; contact customer support or a qualified plumber.

This is normal operation for most 3-way diverters; they are designed to select between outlets, not typically to run both at full flow simultaneously. Check product specifications if simultaneous use is a required feature.