Candle Wick - Flat Cotton - 50 m

This wick performs well with blended paraffin waxes, stearin blends, and natural soy wax. It is designed for a balanced burn across these common types.

This wick is optimized for dipped candles around 15–22 mm and moulded candles around 40–60 mm. For larger diameters, a thicker wick might be necessary to ensure proper burning.

The wick is supplied on a 50-meter roll.

No, this flat cotton wick is ready for use straight from the roll. Ensure it is properly secured and centered in your candle.

Ensure the wick is centered and that the candle diameter is appropriate for the wick size. For the first burn, allow the candle to melt evenly across the entire surface to the edges of the container.

A flat cotton wick is woven in a flat structure, which helps it to stand upright and burn more steadily, promoting an even consumption of wax.

It is recommended to trim the wick to approximately 1/4 inch (6 mm) before each use to ensure a clean and safe burn.

Ensure the wick is centered and taut. Trim the wick to 1/4 inch before lighting. Check if the candle diameter is within the recommended range for this wick type.

The wick might be too short, or the candle diameter too large for this wick. Try a slightly longer wick or ensure the candle diameter is within the 15-22mm (dipped) or 40-60mm (moulded) range.

Trim the wick to 1/4 inch. If the problem persists, the wick may be too thick for the candle's diameter or wax type. Ensure the wax is properly melted and free of contaminants.

Ensure the wick is centered and that the candle diameter is suitable for this wick. Allow the candle to burn long enough for a full melt pool to form across the surface.