Best current price£16.80from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£16.80Visit shop Fast Mover 50Ml 2K Plastic Repair Rigid Glue Cartridge And Nozzles 5060859872055
Visit shop1 offer from £16.80
View price history by clicking the chart icon.
The Fast Mover 2K Plastic Repair Rigid Glue is an essential tool for automotive technicians and DIY enthusiasts who need a reliable, professional-grade adhesive for structural repairs on semi-rigid plastics. This fast-curing, 2-part polyurethane system offers exceptional bond strength and durability, though users should note that the fast setup time requires careful planning and quick execution during application.
| Model Part Number | FMT6340/KIT |
|---|---|
| Brand | Fast Mover |
No, the kit includes the 50ml cartridge and 10 nozzles, but the dispensing applicator gun must be purchased separately.
This product is formulated specifically for semi-rigid plastics. It may not adhere well to low-surface-energy plastics like polyethylene or polypropylene.
The adhesive is a fast-curing formula. While it sets quickly, we recommend leaving the repair undisturbed for the full cure time indicated on the packaging before handling.
Store the cartridge in a cool, dry place. Leaving the used nozzle on can help seal the cartridge, but it is often better to remove the nozzle, clean the face, and re-cap.
Yes, once fully cured, the adhesive can be sanded and painted to match the surrounding plastic surface.
Check that the applicator gun plungers are level and verify that the cartridge isn't clogged at the tip before attaching a fresh nozzle.
Ensure the plastic surface was properly sanded to increase surface area and thoroughly degreased prior to application.
Always replace the nozzle if the glue has set inside; never try to clear and reuse a cured nozzle as this will disrupt the mixing ratio.
To use the FMT6340/KIT, you will need a standard 50ml dual-cartridge applicator gun. Begin by removing the cap from the cartridge and purging a small amount of product to ensure both sides are flowing evenly. Attach one of the included mixing nozzles by locking it into place. Apply the adhesive to clean, scuffed surfaces to maximize adhesion. After use, either leave the nozzle on the cartridge to act as a cap or remove it and wipe the cartridge openings clean before re-capping. Store the cartridge in a cool, dry place to maintain the shelf life of the polyurethane components.
