Best current price£19.99from eBay
Shopping.co.uk recommended and popular offers
eBay£19.99Visit shop Rockshox Shock Bush Mounting Hardware 25mm x 8mm inc DU Bush 11.4118.091.816
Visit shop1 offer from £19.99
View price history by clicking the chart icon.
The RockShox Rear Shock Mounting Hardware 8 x 25.0 is an essential component for mountain bike enthusiasts and professional mechanics looking to ensure a secure, high-performance connection between a rear shock and a bike frame. Designed for use with standard 1/2 inch x 1/2 inch damper eyelets, this 3-piece set provides the structural integrity required for smooth suspension travel, though users should carefully verify their specific frame width and bolt diameter before installation to ensure perfect compatibility.
| Model Part Number | 11.4118.091.816 |
|---|---|
| Brand | SRAM |
It is designed for standard 1/2 inch x 1/2 inch eyelets, but you must confirm your frame specifically requires 8mm diameter bolts and a 25.0mm mounting width.
No, this set includes the hardware (spacers and sleeve) for the shock eyelet itself, not the frame bolts.
Measure the distance between the two mounting tabs on your bike frame where the shock sits; if it measures 25mm, this is the correct size.
It is highly recommended to use new hardware when installing a new shock to ensure a tight, play-free fit.
Replacement intervals depend on usage; frequent riders in wet or muddy conditions should inspect them at least once per season.
Check the torque of the shock mounting bolts; if the bolts are tight but play persists, the internal bushings may be worn and require replacement.
Ensure the bushing is not misaligned; use a proper press tool rather than a hammer to avoid damaging the metal sleeve.
To install this hardware, you will typically need a dedicated shock bushing tool to press the hardware into the eyelet assembly. Always clean the shock eyelet and frame mounting points before installation to remove grit. Apply a light layer of suspension-safe grease to the contact points to prevent seizing and silent operation. Ensure the bolt diameter matches the 8mm specification of your frame's shock mount bolts; using incorrect bolt sizes can cause significant damage to your frame or the hardware itself. Regularly inspect the hardware every few months for signs of play or looseness.
