Best current price£37.97from B&Q
Shopping.co.uk recommended and popular offers
B&Q£37.97Visit shop B&Q - Avellino Beton 45Cm X 10M Self-Adhesive Vinyl Wrap For Doors And Worktops
Visit shop2 offers from £37.97 - £39.49
View price history by clicking the chart icon.
This D-C-Fix Self Adhesive Vinyl Wrap in Avellino Beton Slate Grey is for DIY enthusiasts and homeowners looking to quickly and affordably refresh surfaces like countertops, kitchen doors, furniture, and wardrobes. Its key benefit is providing a realistic, durable, and easy-to-apply finish that mimics authentic materials, saving you the cost of replacement. A potential caveat is that while designed for easy removal, some residue might require cleaning, and careful application is needed to avoid wrinkles.
| Model Part Number | 5056525302179 |
|---|---|
| Brand | d-c-fix |
It's generally not recommended for freshly painted walls as the adhesive may pull off the paint. If the paint is well-cured and smooth, it might adhere, but testing in an inconspicuous area first is advised. For best results, apply to smooth, non-porous surfaces.
The product has a 5-star rating for durability and lightfastness, suggesting it is designed for long-term use. Actual lifespan will depend on the application area, exposure to wear and tear, and environmental conditions.
While water-resistant for cleaning purposes, it is not designed as a primary waterproof barrier. It can be wiped clean with a damp cloth, but prolonged exposure to standing water, especially at seams, should be avoided.
It is best applied directly to a smooth, clean surface. Applying over wallpaper may result in an uneven finish and potential adhesion issues as the wallpaper texture shows through.
You will need a sharp craft knife or scissors for cutting, a squeegee or credit card for smoothing, and a soft cloth for cleaning. A measuring tape and pencil are also helpful.
Roll the unused portion back up with the backing paper in place and store it in its original packaging or a protective tube in a cool, dry place away from direct sunlight to prevent damage and maintain adhesion.
Gently lift the vinyl from the bubble or wrinkle using a pin or craft knife, then re-smooth the area using a squeegee, working outwards. The repositionable adhesive allows for minor adjustments.
Ensure the surface is thoroughly clean, dry, and free from dust or grease. For older surfaces, a light sanding might improve adhesion, but ensure it's wiped clean afterward.
Use a hairdryer on a low heat setting to gently warm the vinyl. This softens the adhesive, making it easier to peel back slowly and evenly. Be patient and avoid pulling too hard.
Apply a small amount of warm, soapy water to the residue. Let it sit for a minute, then gently wipe it away with a soft cloth. For tougher residue, a dedicated adhesive remover suitable for the underlying surface may be used cautiously.
Setup:
Compatibility:
Care:
