McLaren Ceramic Paste Wax - 3x200ml
Best current price£30.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£30.99Visit shop B&Q - Ceramic Paste Wax Hydrophobic Ceramic Protective Coating 3X200Ml
Visit shopB&Q£30.99Visit shop All Offers
2 offers from £30.99
View price history by clicking the chart icon.
B&QB&Q - Ceramic Paste Wax Hydrophobic Ceramic Protective Coating 3X200Ml
Free delivery in 1–3 days
£30.99
Visit shop
OnBuy.comMclaren Ceramic Paste Wax Hydrophobic Ceramic Protective Coating 3X200ml 5056820515458
Free delivery in 1–3 days
£30.99
Visit shop
Product Information
Full details
The McLaren Ceramic Paste Wax is designed for automotive enthusiasts and detailers seeking a durable, high-gloss protective coating for their vehicles. Its key benefit is the advanced Si02 technology combined with natural waxes, providing an ultra-hydrophobic barrier with unparalleled gloss and water beading. A potential caveat is that optimal results require a clean and dry paint surface prior to application, and careful buffing to avoid residue.
All features
| Brand | McLaren |
|---|
Extended Product Information
FAQs
How long does the protection typically last?
Durability can vary based on environmental conditions, washing frequency, and maintenance. However, the Si02 infusion aims to provide longer-lasting protection compared to traditional waxes, often lasting several months.
Can I layer this wax for increased protection?
Yes, for enhanced gloss and protection, a second thin coat can be applied after the first coat has been buffed off. Allow adequate curing time between layers if desired, though immediate application is generally fine.
Is this product suitable for new car paint?
Yes, McLaren Ceramic Paste Wax is safe for all painted surfaces, including new car paint. Ensure the paint is properly prepared (clean and dry) before application.
What is the best type of towel to use for buffing?
A high-quality, plush microfiber towel is recommended for buffing off the wax residue. Use multiple towels and flip them frequently to ensure a clean surface for buffing.
Does this product contain any harsh chemicals?
No, the formulation is designed to be safe on all painted surfaces and contains no aromatic solvents.
How often should I reapply the wax?
Reapplication frequency depends on desired protection levels and environmental exposure. Many users reapply every 3-6 months for optimal results, but the wax remains protective even as its hydrophobic properties diminish.
Troubleshooting
Wax is difficult to buff off
The product may have been left on for too long, or applied too thickly. Try buffing a smaller section immediately after application, or use a fresh, plush microfiber towel. Ensure the surface was completely dry before application.
Streaked or hazy finish after buffing
This usually occurs if the wax was not fully removed or if a dirty microfiber towel was used. Ensure you are using a clean, dry microfiber towel and buffing in different directions. If streaks persist, try lightly buffing with a separate clean towel.
Product seems dry or hard in the container
Ensure the lid is sealed properly after use. The paste should remain pliable. If it feels excessively dry, attempt to gently work it with the applicator pad; the oils should help restore its consistency. Store in a temperature-controlled environment.
Pros and Cons
Pros
- Provides long-lasting, durable protection.
- Enhances gloss and water beading significantly.
- Simple to apply and remove, saving time.
- Safe for use on all types of automotive paint.
- Leaves a smooth, high-gloss finish.
Cons
- Requires a thoroughly clean and dry surface for best results.
- Proper buffing technique is necessary to avoid streaks.
- Paste consistency may be slightly more involved than spray waxes for some users.
Setup, Compatibility & Care Instructions
Preparation is Key:
- Ensure the vehicle's paintwork is thoroughly cleaned to remove dirt, grime, and any old wax or sealant.
- Dry the paintwork completely with a clean microfiber towel.
Application:
- Open the container of McLaren Ceramic Paste Wax.
- Use a foam applicator pad and lightly pick up a small amount of product.
- Apply evenly to one section of the vehicle at a time, using overlapping circular motions.
- Allow the product to haze slightly (typically 1-3 minutes, depending on conditions).
- Buff off the residue using a clean, soft microfiber towel. Flip the towel frequently to ensure a residue-free finish.
- Repeat for the entire vehicle.
Compatibility:
- Safe for use on all painted automotive surfaces.
- Not intended for use on matte finishes or rubber/plastic trim unless specified by the vehicle manufacturer.
Care:
- Store the container in a cool, dry place, away from direct sunlight.
- Ensure the lid is tightly sealed after each use to preserve the product.
- Clean applicator pads and microfiber towels separately from other laundry.