Best current price£3.50from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£3.50Visit shop Floplast Flofit+ Push Fit Tap Connector - 15Mm X 1/2Andquot;
Visit shop
The Range£4.72Visit shop Floplast Flofit+ 15Mm 1/2" Tap Connector - Ftc1512 - Plumbing - Grey
Visit shop5 offers from £3.50 - £5.59
View price history by clicking the chart icon.
This Floplast Flofit+ tap connector is ideal for DIY enthusiasts and professionals needing to connect 15mm pipes to 1/2" tap outlets. Its key benefit is a secure, leak-free connection with easy installation and long-term durability backed by a 50-year guarantee. A potential consideration is that it is a plastic fitting, which may require different handling than traditional metal fittings.
| Model Part Number | FTC1512 |
|---|---|
| Brand | FloPlast |
The Floplast Flofit+ FTC1512 is designed to connect 15mm pipes to 1/2" tap outlets, commonly used in plumbing for connecting water supply lines to faucets.
This product comes with a 50 Year Manufacturer's Guarantee.
Yes, the Flofit+ range is suitable for use with Drinking Water and Central Heating Systems, which include hot water applications.
Yes, the Flofit+ fittings are demountable and reusable, allowing for easy disassembly and reassembly.
It is suitable for use in both Hard & Soft water areas.
Push-fit fittings like this generally do not require special tools. A pipe cutter for a clean, square cut is recommended. No soldering or gluing is necessary.
This is a plastic plumbing fitting designed as an alternative to copper.
Ensure the 15mm pipe is fully inserted into the fitting and the pipe end is cut square and free from burrs. Check the 1/2" connection for tightness. If the leak persists, disassemble, clean the pipe end and fitting, and reassemble.
Verify the pipe is the correct diameter (15mm) and that the end is clean, round, and free of damage. Slightly moistening the pipe end can sometimes help. Ensure no debris is inside the fitting.
Confirm the pipe has been pushed in fully until it stops. The internal mechanism locks the pipe in place. For the 1/2" outlet, ensure the thread is properly engaged and tightened according to standard plumbing practices.
Setup: To install the Floplast Flofit+ Tap Connector, ensure the 15mm pipe is cut square and clean. Push the pipe firmly into the 15mm end of the connector until it is fully seated. Then, connect the 1/2" outlet to the tap fitting, ensuring a secure connection.
Compatibility: This connector is designed for 15mm pipes and 1/2" threaded outlets. It is compatible with drinking water systems, central heating systems, and suitable for use in both hard and soft water areas. It is a direct alternative to copper pipe fittings.
Care: The Flofit+ system is demountable. To disconnect, push the grab ring towards the fitting body and pull the pipe out. Clean the fitting and pipe end before re-installing. Avoid using abrasive cleaners; a damp cloth is sufficient for cleaning the exterior.
