VidaXL Anchored J-Bolt w/Nut and Washer - M8 x 120 mm - Silver
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This VidaXL Anchored J-Bolt, measuring M8 x 120 mm in silver, is designed for securely fixing double bar grating panels and is also suitable for fastening roofing sheets and other foundation work. Its primary benefit is the durable, rust-proof stainless steel construction ensuring longevity. A potential caveat is that it is sold in sets of 25, which might be more than required for small projects. Key features include its robust stainless steel build, M8 x 120 mm size, and the inclusion of a J-bolt, hex nut, and washer in each set.
All features
| Colour | Silver |
|---|---|
| Model Part Number | M8 x 120 mm |
| Brand | VidaXL |
Extended Product Information
FAQs
What material is the J-bolt made from?
The J-bolt is made from stainless steel, which is known for its rust-proof and durable properties.
What does 'M8 x 120 mm' refer to?
'M8' refers to the metric thread diameter of 8 millimeters, and '120 mm' refers to the total length of the bolt.
What is included in each set?
Each set includes one J-bolt, one hex nut, and one washer.
How many sets are included in a purchase?
A purchase includes 25 sets of J-bolts with nuts and washers.
Can this J-bolt be used for outdoor applications?
Yes, the stainless steel construction makes it highly suitable for outdoor applications as it is rust-proof and resistant to corrosion.
What is the primary intended use for this J-bolt?
Its primary intended use is for fixing double bar grating panels, but it is also applicable for fastening roofing sheets and other foundation work.
Do I need any special tools for installation?
While the bolt is embedded into concrete, you will need a wrench or socket to tighten the hex nut onto the bolt's threads.
Troubleshooting
J-bolt not holding securely
Ensure the J-bolt was fully embedded in sufficient concrete and that the concrete has fully cured. Verify the correct size nut and washer are used and tightened appropriately.
Difficulty screwing on nut
Check the J-bolt's threads for damage or debris. Clean the threads with a wire brush if necessary. Ensure you are using an M8 nut.
Rust appearing on bolt
Although made of stainless steel, prolonged exposure to highly corrosive environments or certain chemicals might cause minor surface discoloration. Clean with a soft cloth and mild detergent. For persistent issues, reassess the environmental exposure.
Pros and Cons
Pros
- Constructed from rust-proof stainless steel for enhanced durability.
- Each set includes all necessary components (J-bolt, nut, washer).
- Versatile use for grating, roofing, and general construction.
- M8 x 120 mm size provides a strong and reliable anchor.
- Supplied in a convenient pack of 25 sets.
Cons
- Sold in a pack of 25 sets, which may be excessive for small individual projects.
- Specific applications may require additional specialized washers or components not included.
- Requires appropriate tools for installation (e.g., wrench for the nut).
Setup, Compatibility & Care
Setup: These J-bolts are typically embedded into wet concrete before it cures. The bolt is positioned so that the curved 'J' end is securely anchored within the concrete, while the threaded end extends upwards. Ensure the threaded portion is clean and free of debris before pouring concrete. Once the concrete has cured, the hex nut and washer can be used to attach the desired fixture (e.g., a grating panel clamp, a post base, or a structural bracket) to the exposed threads.
Compatibility: The M8 threading is a standard size compatible with most M8 nuts and washers. The J-bolt's primary function is to anchor into a solid substrate like concrete. It is designed for use with double bar grating panels but can be adapted for various fastening needs in construction and DIY projects. Ensure the substrate is sound and capable of bearing the load.
Care: Due to the stainless steel material, minimal care is required. Regular inspection for dirt or debris accumulation is recommended, especially in harsh environments. If necessary, clean with a damp cloth. Avoid abrasive cleaners that could scratch the surface. The inherent rust-proof nature of stainless steel means no additional protective coatings are typically needed.