DART 6 Piece Stubby 4 Wing Tipped Wood Auger Drill Bit Set - 13-32mm
Best current price£61.18from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£61.18Visit shop B&Q - Ds4Abset6 Stubby 4 Wing Auger Bit Set
Visit shopB&Q£61.18Visit shop One Offer
1 offer from £61.18
View price history by clicking the chart icon.
Product Information
Full details
The DART 6 Piece Stubby 4 Wing Tipped Wood Auger Drill Bit Set is designed for professional carpenters, electricians, and DIY enthusiasts who frequently work in tight, restricted spaces where standard-length bits cannot maneuver. Featuring an 80mm stubby length, these bits offer excellent control and stability for clean, accurate holes in wood, though they are limited by their reach and are not intended for deep boring applications.
All features
| Model Part Number | DS4ABSET6 |
|---|---|
| Brand | DART |
Extended Product Information
FAQs
Can these bits be used in a manual brace?
These are optimized for power drills, but the hex shank may work in some adapters; however, power tools are highly recommended.
Are these bits suitable for hardwood?
Yes, they perform well in hardwoods, though they require a drill with sufficient torque for the larger sizes.
What is the maximum depth these bits can drill?
The effective drilling depth is limited by the 80mm stubby design of the bit.
How do I clean the bits?
Wipe them down with a light machine oil after use to prevent rust and remove any wood resin with a solvent or fine wire brush.
Can I sharpen the cutting spurs?
While possible for experienced users with a fine file, it is recommended to maintain the factory edge to ensure the self-feeding mechanism remains balanced.
Troubleshooting
Bit is struggling to bite into the wood.
Check the threaded tip for wood fibers or debris. If the tip is clogged, clear it with a stiff-bristled brush.
Drill motor stalls during operation.
Ensure the battery is fully charged and use a lower RPM setting to increase torque, especially when using the larger 32mm bit.
Hole finish is rough.
Ensure the drill is being held at a 90-degree angle to the surface; uneven pressure can interfere with the four cutting spurs.
Pros and Cons
Pros
- Ideal for drilling in extremely tight spaces
- High-speed chip removal reduces overheating
- Self-feeding tip minimizes user effort
- Produces clean, tear-free hole entry and exit points
- Includes a robust storage case with foam protection
Cons
- Not suitable for deep hole boring due to 80mm limit
- Requires a powerful drill for the larger 32mm diameter bit
- Not intended for use on materials other than wood
Setup, Compatibility & Care
The DART auger bits are designed for use with standard corded or cordless drills. Always ensure the `hex shank` is fully seated in the chuck or quick-change adapter before initiating drilling. To ensure longevity, keep the threaded tips clear of debris and avoid hitting metal fasteners or nails, which can dull the cutting spurs. Store the bits in their provided foam-lined zipped case to protect the precision-ground edges from corrosion and accidental damage between uses.