Best current price£30.00from Homebase
Shopping.co.uk recommended and popular offers
Homebase£30.00Visit shop National Skirting White Vienna Primed Skirting Board 18Mm 195 X 3040Mm
Visit shop
B&Q£33.55Visit shop - National Skirting Vienna Mdf Skirting Board195mm X 18mm X 3040mmPrimedNo Rebate
Visit shop4 offers from £30.00 - £33.55
View price history by clicking the chart icon.
The National Skirting Vienna Skirting Board is an ideal choice for homeowners and renovators seeking a classic, elegant finish for their interior spaces. Featuring a traditional profile with flowing curves, this moisture-resistant MDF board acts as a protective, aesthetic buffer between your walls and flooring. While it offers a versatile white primed base, note that it arrives unfinished and requires a topcoat of paint or gloss to achieve the final desired look and long-term protection.
| Colour | White |
|---|---|
| Series | Vienna |
| Brand | National Skirting |
It arrives with a high-quality white primer. You will need to apply your final coat of paint or gloss to complete the installation.
It is made of moisture-resistant MDF, but it is not waterproof. It is best used in standard living areas; avoid direct water exposure.
No, this is a rigid MDF product and is designed specifically for flat, straight walls.
Use a miter saw or a high-tooth count hand saw for the cleanest finish.
You will need a measuring tape, miter saw, construction adhesive, nail gun or hammer and nails, wood filler, and painting supplies.
This is considered a tall, high-profile skirting board, which is popular for creating a traditional, high-end look in larger rooms.
Use a flexible decorators caulk to fill small gaps along the top edge or wall corner, smoothing it with a damp finger for a clean seal.
Ensure your saw blade is sharp and use a miter block or compound miter saw to achieve the precise 45-degree angle required for internal and external corners.
Lightly sand the factory-primed surface with a fine-grit sandpaper (240 grit) to create a mechanical key before applying your topcoat.
To install, measure your wall lengths accurately and use a miter saw to cut your corners for a seamless joint. Secure the boards using a combination of construction adhesive on the back and finishing nails or screws into the wall studs. Once installed, fill any nail holes with a high-quality wood filler, sand lightly once dry, and apply your chosen finish—such as eggshell, satin, or gloss paint. For ongoing maintenance, simply wipe the surface with a soft, dry cloth to remove dust. If scuffs occur, the primed and painted surface can be easily spot-touched with matching paint.
