Loctite Rear View Mirror Bonder - 0.5g - Glass & Metal Glue

Name: Loctite Rear View Mirror Bonder - 0.5g - Glass & Metal Glue
Brand: Loctite
SKU: 37uypkueib
Availability: InStock

Loctite Rear View Mirror Bonder is a specialist adhesive that permanently bonds glass to metal, re...

Best current price£4.99from eBay

Best offers

Shopping.co.uk recommended and popular offers

Lowest price

eBay£4.99Visit shop

Loctite Rear View Mirror Bond Super Glue Feet of Metal on the Windshield 0.5g

Visit shop

All Offers

11 offers from £4.99 - £11.16

View price history by clicking the chart icon.

eBayLoctite Rear View Mirror Bond Super Glue Feet of Metal on the Windshield 0.5g

£2.99 delivery

£4.99

Visit shop

OnBuy.comRear View Mirror Bonder - 0.5Ml 5010266168227

Free delivery in 1–3 days

£7.05

Visit shop

B&QB&Q - Rear View Mirror Bonder 0.5MlInstant Strong Glass-To-Metal Glue For Car Mirror & Auto Repair

Free delivery in 1–3 days

£8.47

Visit shop

Product Information

Full details

This guide is for anyone needing to reattach a rear view mirror or other glass-to-metal components using Loctite Rear View Mirror Bonder. The primary benefit is a permanent, strong bond that resists UV, moisture, and chemicals, ensuring long-lasting adhesion. However, this product is only suitable for glass and metal surfaces. This guide provides step-by-step instructions and helpful tips for successful application.

All features

Model Part Number	194088
Brand	Loctite

Extended Product Information

FAQs

What surfaces can I use this adhesive on?

Loctite Rear View Mirror Bonder is designed for use on glass and metal surfaces only.

How long does it take for the adhesive to set?

The adhesive typically sets in a few minutes, but allow for full curing as per the instructions.

Is the bond permanent?

Yes, the bond created by Loctite Rear View Mirror Bonder is designed to be permanent.

Can this adhesive withstand high temperatures?

The adhesive performs best at room temperature, however, it is designed to withstand the range of temperatures typically found in a vehicle.

What should I do if the mirror detaches again?

Re-clean both surfaces, apply fresh adhesive, and ensure proper alignment and sufficient curing time.

Can I use this for other bonding tasks?

While it is excellent for rearview mirrors, it can also be used for other glass-to-metal applications like phone and radio aerials.

What is included in the kit?

The kit contains a tube of adhesive and an activator mesh.

How should I store the adhesive?

Store the adhesive in a cool, dry place, away from direct sunlight and extreme temperatures.

Troubleshooting

Mirror detached shortly after bonding.

Ensure surfaces were properly cleaned and prepared. Reapply the adhesive, following the instructions carefully. Check the expiry date of the adhesive.

Weak bond or incomplete adhesion.

Make sure the correct amount of adhesive was applied. Confirm the surfaces were compatible and not damaged. Allow for sufficient curing time before testing the bond.

Adhesive not setting.

Ensure the adhesive is fresh. If the temperature is too low, move to a warmer environment. Ensure you used the activator mesh

Pros and Cons

Pros

Permanent bond for long-lasting results.
Resistant to environmental factors like UV and moisture.
Easy to apply, saving time and effort.
Specifically designed for glass-to-metal applications.
The adhesive sets quickly, minimizing downtime.
Compact kit contains everything needed for the repair

Cons

Only suitable for glass and metal.
Performance is best at room temperature.
Requires careful surface preparation for optimal results.
May not be suitable for all types of glass or metal.
Small quantity of adhesive, suitable for single applications.

Setup, Compatibility & Care

Preparation: Clean the glass and metal surfaces thoroughly. Use a suitable cleaner to remove any dirt, grease, or old adhesive residue. Ensure the surfaces are completely dry before proceeding.
Mesh Preparation: Trim the provided mesh to the size of the mirror mounting button or aerial base.
Button Preparation: If the mounting button is detached from the mirror bracket, remove it. Use a marker to mark the mounting area on both the glass and the button.
Application: Apply the adhesive to the button. Attach the button to the glass, aligning it with the marked area. Hold the button in place for the time specified in the instructions (typically a few minutes) until the adhesive sets.
Curing: Allow the bond to fully cure as per the product instructions before putting stress on the connection.

Compatibility: This adhesive is only compatible with glass and metal surfaces. Ensure both surfaces are clean and free of contaminants for optimal bonding.

Care: Avoid exposing the bonded area to extreme temperatures or moisture during the initial curing period. Once cured, the bond is durable and resistant to most conditions.