Best current price£6.30from eBay
Shopping.co.uk recommended and popular offers
eBay£6.30Visit shop US PRO Tools SDS Plus Flat Chisel 20MM X 250MM 7215
Visit shop
B&Q£6.46Visit shop B&Q - Tools Sds Plus Flat Chisel 20mm X 250mm 7215
Visit shop4 offers from £6.30 - £6.46
View price history by clicking the chart icon.
This US PRO SDS Plus Flat Chisel is designed for professionals and DIY enthusiasts undertaking demolition, cutting, and chiselling on hard materials like concrete, stone, and brickwork with SDS Plus hammer drills. Its primary benefit is the robust construction from hardened steel, ensuring durability and long service life for heavy-duty tasks. A key consideration is its specific SDS Plus shank, requiring compatible hammer drills.
| Model Part Number | 7215 |
|---|---|
| Brand | US PRO |
This chisel requires a rotary hammer drill with an SDS Plus chuck system.
It is designed for use on concrete, stone, block, masonry, tiles, and brickwork.
Clean off debris after use, apply a light coat of oil to prevent rust, and store in a dry place. Inspect the edge regularly.
Heat treatment enhances the steel's hardness and durability, making it more resistant to wear and extending its service life under heavy use.
No, as a flat chisel, it is designed for demolition and rough cutting. It is not suitable for fine or intricate detail work.
SDS Plus and SDS Max are different chuck systems designed for different sizes and power levels of rotary hammer drills. This chisel is specifically for SDS Plus.
Ensure the drill chuck is clean and free of debris. Make sure you are using an SDS Plus compatible drill and that the chuck is properly opened and engaged.
Verify that the drill is set to hammer mode. Check that the chisel edge is not dull or damaged. Ensure the chisel is fully inserted and locked into the drill chuck.
This may indicate excessive force, hitting unintended materials (like rebar within concrete), or a manufacturing defect. Reduce impact force if possible or consider if the material being worked on is too hard for this specific chisel.
Setup: To set up the chisel, insert the SDS Plus shank firmly into the chuck of your SDS Plus rotary hammer drill. Ensure the drill is switched off and unplugged before insertion. Once seated, twist and pull slightly to confirm it's locked in place. Engage the appropriate hammer drill setting for the task.
Compatibility: This chisel is designed exclusively for rotary hammer drills with an SDS Plus chuck system. It will not fit standard drill chucks or drills with other shank types (e.g., SDS Max).
Care: After each use, clean the chisel by removing any dust or debris, preferably with a wire brush. For storage, apply a light coat of oil to the metal surfaces to prevent rust. Store in a dry environment. Periodically inspect the cutting edge for any damage or excessive wear.
