HydroSure Watering Lance - 90cm

Disconnect the lance from the hose. Look for a point where the filter is accessible, often at the connection end. Gently pull or unscrew the filter housing (refer to product packaging or manufacturer diagrams if unsure). Rinse the filter under running water to remove debris. Reassemble carefully, ensuring all parts are securely in place before reattaching to the hose.

No, this watering lance features a fixed flow control valve only. It allows you to adjust the volume of water but does not offer different spray patterns like shower, mist, or jet.

Please refer to the product packaging or the retailer's website for specific warranty information, as it can vary.

The chrome finish is designed for durability and rust prevention. While resistant to normal use, it can be scratched by sharp objects. Avoid abrasive cleaning methods to maintain its appearance.

No, this watering lance is designed for use with standard domestic garden hose water pressure and is not suitable for high-pressure washer systems.

The lance body itself is 90cm. The length including the integrated quick-click connector will be slightly longer.

Ensure the male quick-click connector is fully engaged with the female fitting on the hose. Check the rubber seal on the female fitting for damage or wear.

Check that the lance valve is fully open. Inspect the built-in filter for blockages and clean if necessary. Ensure the garden tap is fully open and water pressure is adequate.

Operate the valve a few times with gentle pressure. If the issue persists, a small amount of silicone lubricant may be applied to the valve mechanism (ensure it is garden-safe).