Fplm132H-6 132Cc Petrol Push Lawnmower - B&Q

Allow the engine to cool before storing. Clean and maintain the product before storage. Store the mower in a dry, well-ventilated area away from direct sunlight.

Refer to the product manual for the recommended fuel type. Generally, it requires unleaded petrol.

Refer to the manual for the recommended oil change intervals. This is usually after the first few hours of use, then periodically throughout the mowing season.

After each use, remove grass clippings and debris from the cutting deck and the engine housing. Use a brush or cloth to clean the exterior. Do not use water to clean the engine.

Always wear eye protection and sturdy shoes. Never operate the mower on wet grass. Keep children and pets away from the mowing area.

Disconnect the spark plug wire. Remove the blade, and sharpen it with a file or take it to a professional. Ensure the blade is balanced after sharpening.

Stop the mower immediately and allow the engine to cool down. Check the oil level and ensure the cooling fins are not blocked. Consult the manual if the problem persists.

Check the fuel level, ensure the choke is engaged, and check the spark plug. If the engine still doesn't start, refer to the manual for detailed starting instructions.

Sharpen or replace the blade. Ensure the cutting height is appropriate for your grass type. Clear any blockages in the cutting deck.

Stop the mower immediately and check the blade for damage or imbalances. Tighten all loose components.

Check the fuel filter for blockages, ensure the fuel tank cap is venting properly, and inspect the spark plug.