LED Solar Streetlight - V-TAC - White - VT-ST15 8549
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This V-TAC LED Solar Streetlight (VT-ST15 8549) is designed for outdoor lighting in areas without direct power access. It offers a bright 1600lm illumination with a wide 140° beam angle, ideal for streets, gardens, and pathways. Key features include a built-in motion sensor for enhanced efficiency and an IP65 rating for durability. A potential consideration is its charging time, which requires sufficient sunlight.
All features
| Colour | White |
|---|---|
| Model Part Number | VT-ST15 8549 |
| Brand | V-TAC |
Extended Product Information
FAQs
How long does the battery last on a full charge?
The streetlight can operate for up to 36 hours on a full charge, depending on the frequency of motion detection and the duration of the 100% brightness activation.
What is the charging time required for the solar panel?
The solar panel requires approximately 6-7 hours of direct sunlight to fully charge the internal battery.
What is the detection range of the motion sensor?
The motion sensor has a detection range of 3 to 8 meters.
Is this light suitable for all weather conditions?
Yes, it features an IP65 rating and ABS construction, making it resistant to dust, heat, UV, and water, suitable for most outdoor environments.
Can this streetlight be dimmed manually?
No, this model is non-dimmable. It operates at a permanent 3% brightness and switches to 100% for 20 seconds upon motion detection.
What pole diameters are compatible with this light?
The mounting system is compatible with pole diameters ranging from a minimum of 38mm to a maximum of 50mm.
What is the color temperature of the light?
The light has a Neutral White color temperature of 4000K.
Troubleshooting
Light does not turn on
Ensure the solar panel is clean and receiving direct sunlight. Check if the unit has had sufficient charging time (6-7 hours). Verify that the switch is in the 'on' position (if applicable). Test in complete darkness to rule out ambient light interference.
Light is dim or not lasting through the night
The solar panel may be dirty or obstructed, preventing adequate charging. Clean the solar panel. Relocate the light to an area with more direct sunlight. Reduce the duration of the 100% brightness setting if the motion sensor is frequently triggered.
Motion sensor not responding
Ensure the sensor lens is clean and free from obstructions. Check if the detection range (3-8 meters) is being met. Test in varying light conditions to confirm functionality.
Light turns on during the day
This can happen if the ambient light sensor is covered or malfunctioning, or if the light is exposed to sudden bright light sources. Ensure the light is in an area with a clear day/night cycle and the sensor is not obstructed.
Pros and Cons
Pros
- Environmentally friendly and cost-saving due to solar power.
- Enhanced security and energy efficiency with motion-activated lighting.
- Robust and weather-resistant design suitable for outdoor use.
- Versatile mounting options for different locations.
- Provides significant illumination for large areas.
Cons
- Reliant on sunlight for charging; performance may vary with weather conditions.
- Requires an initial charging period of 6-7 hours.
- Motion sensor range is limited to 3-8 meters.
- Non-dimmable functionality.
Setup, Compatibility & Care
Setup:
- Choose Location: Select a spot that receives maximum direct sunlight throughout the day for optimal charging. Avoid shaded areas.
- Mounting: Securely attach the streetlight using the provided hardware to a wall or a pole. Ensure pole compatibility (38mm to 50mm diameter).
- Initial Charge: Allow the solar panel to charge for 6-7 hours in direct sunlight before first use.
Compatibility:
- Pole Diameter: Compatible with poles ranging from 38mm to 50mm in diameter.
- Mounting Surfaces: Suitable for flat walls or compatible poles.
Care:
- Solar Panel Cleaning: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. This ensures maximum solar absorption and efficient charging.
- Sensor Check: Ensure the motion sensor lens is kept clean and unobstructed.
- Avoid Harsh Chemicals: Do not use abrasive cleaners or solvents, as they may damage the ABS construction.