D Pro T Bathrooms Shower Tray - 1600mm X 800mm Rectangle Slate Effect White

The tray itself is made from a lightweight material with a slate effect finish. The drain cover is typically lightweight slate/stainless steel 304, and the waste is ABS.

Yes, the slate textured finish is designed to provide enhanced grip and significantly improve safety by reducing the risk of slips in wet conditions.

Yes, the tray is designed to be easily cut and shaped on-site to accommodate specific bathroom dimensions.

The shower tray has a slimline height of 30mm.

It features a special hidden center waste design that matches the shower tray covering for a seamless look, and includes a fast-flow waste for efficient drainage.

The tray is solid and heavy for durability. For example, a 1600mm x 800mm tray weighs approximately 76 KG.

The hidden waste cover can usually be lifted off to access the trap beneath for cleaning. Refer to the care instructions for specific details.

Adjust the supporting structure underneath the tray or use leveling compounds to ensure a perfectly flat surface before final installation.

Check the hidden center waste for any debris or hair buildup. Remove and clean the waste trap as per care instructions.

Ensure the tray is fully supported by the subfloor or frame. The net design framework should rest evenly on a solid base. Re-secure supports if necessary.

Use a mild, non-abrasive cleaner and a soft cloth. For stubborn stains, a diluted solution of white vinegar might help, followed by rinsing.