AB Tools 1/8" BSP Female To 1/8" BSP Female Threaded Bush Joiner Fitting - FT075

BSP stands for British Standard Pipe. The 1/8" refers to the nominal pipe size, not the actual outer diameter of the thread. For 1/8" BSP, the approximate outer diameter is 9.5mm.

This fitting is designed for general plumbing and pneumatic applications with low to medium pressure ratings. It is not recommended for high-pressure industrial systems.

You will typically need a standard wrench or spanner to grip the hexagonal body of the bush for tightening.

You can connect any two components that have 1/8" BSP male threads. This commonly includes pipes, hoses, valves, and other fittings.

Ensure clean, undamaged threads on both the bush and the connecting components. Tighten firmly but do not overtighten. Using PTFE tape or a suitable thread sealant on the male threads is recommended for most applications.

The zinc plating provides corrosion resistance but can wear down over time with abrasion or exposure to harsh environments. It is designed to offer a good level of protection for typical use.

Ensure threads are clean and properly aligned. Check if the male fittings are fully seated. Tighten the bush slightly more, or consider using appropriate thread sealant (e.g., PTFE tape) on the male threads before assembly.

Verify that the fittings have compatible 1/8" BSP male threads. Check for any debris or damage on the threads of both the bush and the mating components. Ensure they are aligned correctly before applying force.

While zinc-plated, prolonged exposure to harsh chemicals or extreme moisture can still cause corrosion. Clean the affected area gently and ensure the fitting is used within its intended environmental limits. If corrosion is severe, replacement may be necessary.