Racers Tape - Black, 1 Inch x 90 Ft - Demon Tweeks

Racers Tape is designed for a variety of uses on the race track and in the pit lane, including marking, identification, temporary repairs, and surface protection.

Apply the tape to a clean, dry surface. Peel off the backing and press down firmly and evenly across the tape, paying attention to the edges, to ensure good adhesion.

While it can adhere to painted surfaces, it is not recommended for permanent application on high-quality paint finishes as it may leave residue or affect the paint upon removal. Always test in a small, inconspicuous area first.

This specific product is 1 inch wide by 90 feet long and black. However, Racers Tape is available from Demon Tweeks in other sizes (e.g., 2 inches wide) and colors.

Depending on the surface and how long the tape has been applied, some adhesive residue may be left upon removal. This can typically be cleaned with an appropriate adhesive remover.

The tape itself is generally resistant to water, but prolonged exposure or submersion may affect its adhesion over time.

Ensure the surface is clean, dry, and free from dust, grease, or oil. Apply firm, even pressure during application.

Remove the tape slowly and at a low angle. If residue remains, use an adhesive remover specifically designed for automotive use, testing in an inconspicuous area first.

This tape is not intended for permanent application on all surfaces. Test in a hidden area first. For sensitive surfaces, consider using a less aggressive tape or a temporary protective film.