Best current price£75.16from Tiny Lux Affiliate Programme
Shopping.co.uk recommended and popular offers
Tiny Lux Affiliate Programme£75.16Visit shop Nedis White/Light 2000 W, Adjustable Thermostat, 2 Heat Modes, Ip22, Remote
Visit shop1 offer from £75.16
View price history by clicking the chart icon.
This guide is for anyone looking to understand and effectively use the Nedis Bathroom Fan Heater (HTBA20WT). It's ideal for quickly warming bathrooms, kitchens, and other small spaces up to 20m². While it offers convenient features like a remote control and timer, it's important to note that this heater requires hard-wiring installation by a qualified electrician, as it ships without a plug.
| Model Part Number | HTBA20WT |
|---|---|
| Brand | Nedis |
Refer to the user manual for detailed instructions. The timer allows you to program on/off times for each day of the week, with up to 6 programs per day. You can set the timer using the buttons on the heater or the remote control.
The IP22 rating means the heater is protected against solid objects larger than 12.5mm and against direct sprays of water up to 15 degrees from vertical. This makes it suitable for use in bathrooms.
This heater is designed for spaces up to 20m². While it might provide some warmth in a larger room, its effectiveness will be reduced. It is best suited for bathrooms, kitchens, and similar sized areas.
It uses a PTC ceramic heating element, which heats up quickly and cools down slowly.
Consult the user manual for instructions. Usually, you'll need to remove a small cover on the back of the remote and replace the batteries with the correct type (often AAA).
Yes, the heater has built-in overheat protection to ensure safe operation. It will automatically shut off if it overheats.
Check the electrical connection and ensure the circuit breaker hasn't tripped. If the issue persists, consult an electrician.
Make sure the heater is set to a heat mode and the thermostat is set to a temperature higher than the current room temperature. Check the heating element.
Ensure the batteries in the remote control are not depleted. Point the remote directly at the heater and try again. Also, make sure nothing is blocking the sensor on the heater.
This may be caused by dust on the heating element. Allow the heater to run for a few minutes in a well-ventilated area to burn off the dust. If the odor persists, turn off and consult an electrician.
Setup:
This heater is designed for wall mounting and *must* be hard-wired into a fused connection. Important: Consult a qualified electrician for installation. The unit is supplied bare-wired, with no plug included. Refer to the included manual for detailed installation instructions.
Compatibility:
This heater operates on 100 - 240V, 50 Hz power supply and is suitable for indoor use, particularly bathrooms, kitchens, en suites, laundry areas, shower rooms, utility rooms, garages, workshops, and caravans.
Care:
