Dulux Trade Vinyl Matt Paint - Mallard Green - 5L

This paint is designed for interior walls and ceilings.

Coverage is excellent and often requires fewer coats than standard paints, typically two coats are sufficient, but this can depend on the surface and the previous colour.

No, this product is mixed to order and cannot be returned or refunded.

Clean brushes and rollers immediately after use with water.

This is a matt finish and is not designed for high-traffic areas requiring frequent washing. It can be wiped gently with a damp cloth.

The paint is quick drying. A second coat can usually be applied after a few hours, but always check the specific drying conditions and product instructions.

Low VOC means the paint contains low levels of Volatile Organic Compounds, which are chemicals that can be released into the air and may affect indoor air quality.

Stir the paint thoroughly. If still too thick, add a very small amount of clean water (no more than 10% by volume) and mix well.

Ensure the paint is applied evenly and avoid over-spreading. Use a good quality roller or brush and maintain a wet edge between strokes. Allow adequate drying time between coats.

Ensure the surface was properly prepared and primed if necessary. Apply a second coat, ensuring the first coat is fully dry. For drastic colour changes, a primer may be required.

Check that the room has adequate ventilation and that the temperature is within the recommended range (typically 10-25°C). Avoid applying paint in excessively humid conditions.