Wolf Submersible Water Pump - 750W

The Wolf 750W Submersible Water Pump is designed to handle both clean and dirty water with precisi...

Best current price£34.79from OnBuy.com

All Offers

2 offers from £34.79 - £39.99

View price history by clicking the chart icon.

OnBuy.comWolf Submersible Water Pump, 750W, Residential Drainage & Ponds, Clean & Dirty Water
Free delivery in 1–3 days
£34.79
Visit shop
B&QB&Q - Submersible Water Pump750WResidential Drainage & PondsClean & Dirty Water
Free delivery in 1–3 days
£39.99
Visit shop

Product Information

Full details

The Wolf 750W Submersible Water Pump is an essential tool for homeowners and DIY enthusiasts who need a reliable solution for clearing water from ponds, flooded basements, or cisterns. With its dual-purpose design capable of handling both clean and dirty water, it offers high efficiency and a solid 8-meter lift capacity, though users should be mindful that it requires a sufficiently sized basin to allow the float switch to operate correctly.

All features

BrandWolf

Extended Product Information

FAQs

Can this pump handle solids?

It is designed to handle clean and dirty water, but it is not intended for pumping heavy sludge or large solid debris.

Does it need to be fully submerged?

Yes, for best performance and to prevent overheating, the pump should be submerged in water during operation.

What is the maximum head height?

The pump is capable of a maximum lift (head) of 8 meters.

Is the float switch adjustable?

The float switch operates automatically; ensure it has enough physical room to move up and down in your drainage area.

How often should I clean the pump?

It is recommended to rinse the pump with fresh water after every use, especially after working in dirty water or ponds, to prolong its life.

Troubleshooting

Pump fails to turn on

Verify the power connection and ensure the float switch is in an upright position. If the water level is too low, the float switch will not trigger the motor.

Low water flow output

Check the discharge hose for any kinks, blockages, or sharp bends that may restrict water flow.

Pump is running but not pumping

Ensure the pump is fully primed and there is no air lock in the pump housing. Tilt the pump slightly while submerged to allow trapped air to escape.

Pros and Cons

Pros

  • Efficient handling of both clean and dirty water
  • Reliable automatic float switch prevents dry running
  • Strong 8-meter lift and depth capacity for deep drainage
  • Sturdy construction suitable for regular residential use

Cons

  • Requires enough space for the float switch to move freely
  • Heavy-duty operation may require specific hose sizing
  • Not intended for handling large solid debris or heavy sludge

Setup, Compatibility & Care

  1. Setup: Connect a suitable discharge hose to the pump outlet using a hose clamp to ensure a watertight seal.
  2. Placement: Lower the pump into the lowest point of the area to be drained. Ensure the area is wide enough for the float switch to pivot upwards as water levels rise.
  3. Compatibility: Verify that your drainage hose diameter is compatible with the pump's outlet to maximize flow rates.
  4. Care: After using the pump in dirty water or ponds, rinse the exterior and the impeller housing with clean water to prevent sediment buildup. Periodically inspect the power cable for any signs of fraying or damage.

Price History

DatePrice
Visit shop