Falken Wildpeak A/T AT3WA Tyre - 215/75R15 100/97R

This is the tire's size and service description. '215' is the tread width in millimeters. '75' is the aspect ratio (the tire's height as a percentage of its width). 'R15' indicates it's a radial tire designed for a 15-inch rim. '100/97' is the dual-load index, and 'R' is the speed rating, indicating the maximum speed the tire can safely carry its rated load.

Yes, absolutely. The Falken Wildpeak A/T AT3WA is specifically designed for true all-season performance and carries the Three Peak Mountain Snowflake (3PMSF) and M+S (Mud and Snow) ratings, confirming its capability in severe winter conditions, including heavy snow.

You should check your tire pressure at least once a month, as well as before any long trips. Always check pressure when tires are cold (before driving) for the most accurate reading.

Always refer to your vehicle's owner's manual or the tire placard located on the driver's side door jamb for the recommended tire pressure. Do not use the maximum pressure listed on the tire's sidewall.

You should replace your tires when the tread depth reaches 2/32nds of an inch (1.6mm), indicated by the built-in tread wear indicators. Also, replace them if you notice any significant damage like deep cuts, bulges, or punctures that cannot be safely repaired.

Tire rotation helps promote even wear across all four tires, extending their lifespan. A common recommendation is to rotate your tires every 5,000 to 8,000 miles, or as specified by your vehicle's manufacturer.

This often indicates incorrect tire pressure, improper wheel alignment, or infrequent tire rotations. Check your tire pressure regularly, ensure your vehicle's alignment is within specifications, and adhere to a consistent tire rotation schedule.

Vibrations can be caused by unbalanced wheels, a bent rim, or internal tire damage. Have your wheels checked for balance and inspected for damage by a professional.

While these tires are severe weather rated, severe loss of traction could indicate excessively worn tread, improper tire pressure for conditions, or driving too fast for the conditions. Check tread depth and tire pressure. Always adjust driving speed to match road conditions.

While the AT3WA is designed for low noise, unusual or excessive noise might suggest a balance issue, irregular wear patterns, or a suspension problem. Have a professional inspect your tires and suspension components.