Arctic Hayes Non Contact Voltage Detector - AH12
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Arctic Hayes Non Contact Voltage Detector (AH12) is designed for electricians, DIY enthusiasts, and anyone needing to safely check for AC voltage. Its key benefit is providing quick, non-contact detection of live circuits with both audible and visual alarms. A potential caveat is its AC voltage-only detection capability. This versatile tool detects AC voltage from 12V up to 10000V, featuring a signal indicator that flashes red and beeps when voltage is present.
All features
| Model Part Number | AH12 |
|---|---|
| Brand | Arctic Hayes |
Extended Product Information
FAQs
Can this detector be used for DC voltage?
No, the Arctic Hayes Non Contact Voltage Detector AH12 is designed exclusively for detecting AC voltage. It will not detect DC voltage.
What is the voltage range it can detect?
The detector can sense AC voltage from 12V up to 10000V.
How does the detector indicate the presence of voltage?
It uses both an audible beeper and a visual red flashing signal indicator when AC voltage is detected near the probe.
Is it safe to use around live circuits?
Yes, the detector features double insulation for enhanced safety when working around live circuits, and its non-contact nature further reduces risk.
What are the operating temperature limits?
The detector operates effectively in conditions ranging from 0°C to +40°C (32°F to 104°F).
Does it come with batteries?
Yes, batteries are included with the detector, allowing you to use it right away.
Troubleshooting
Detector not beeping or flashing, but voltage is expected.
Ensure the device is turned on and batteries are fresh and correctly installed. Verify that the voltage is within the detector's AC range (12V - 10000V) and that the probe is sufficiently close to the voltage source.
False positive (detector signals voltage when none is expected).
Check for nearby live AC voltage sources that might be inducing a reading. Ensure the detector is not being used near strong electromagnetic fields. Replace batteries if they are low.
Intermittent beeping or flashing.
This could indicate a weak or fluctuating voltage source, or low battery power. Replace the batteries. If the issue persists, the voltage source may be unstable.
Pros and Cons
Pros
- Provides immediate and clear voltage detection.
- Enhances safety by allowing non-contact voltage checks.
- Dual alarm system (audible and visual) ensures alerts are not missed.
- Suitable for a wide range of AC voltage applications.
- Easy to use with simple operation.
Cons
- Only detects AC voltage, not DC voltage.
- Maximum operating temperature is 40°C (104°F), limiting use in extreme heat.
- Requires batteries to operate.
Setup, Compatibility & Care
Setup:
- Ensure batteries are correctly inserted into the battery compartment. Batteries are included.
- Turn on the device.
Compatibility:
- This detector is designed for AC voltage only. It will not detect DC voltage.
- Operating voltage range: 12V - 10000V AC.
- Operating frequency: 50/60Hz.
- Operates in ambient temperatures from 0°C to +40°C (32°F to 104°F).
Care:
- Keep the detector clean by wiping it with a dry or slightly damp cloth. Do not use abrasive cleaners or solvents.
- Store in a dry place when not in use.
- Avoid dropping the device, as this may affect its accuracy and functionality.
- Periodically check the batteries and replace them when needed to ensure optimal performance.