Geberit Mapress Copper Cap - 28mm
Best current price£16.86from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£16.86Visit shop B&Q - Mapress 60235 Copper Cap 28mm
Visit shopB&Q£16.86Visit shop One Offer
1 offer from £16.86
View price history by clicking the chart icon.
Product Information
Full details
This guide is for professional plumbers and heating engineers working with copper pipe systems. The Geberit Mapress Copper Cap - 28mm offers a reliable and efficient method for terminating copper pipe runs, ensuring a secure seal. A key consideration is ensuring compatibility with the Geberit Mapress system and proper pressing tools for installation. This product is designed to cap off a 28mm copper pipe, providing a clean and permanent end to a pipe section.
All features
| Model Part Number | 60235 |
|---|---|
| Brand | Geberit |
Extended Product Information
FAQs
What is the primary use of the Geberit Mapress Copper Cap?
Its primary use is to permanently terminate a 28mm copper pipe within a Geberit Mapress system, providing a secure and leak-proof seal.
Do I need special tools to install this cap?
Yes, you require a specific Geberit Mapress pressing tool with the correct jaws for 28mm fittings to ensure a secure and reliable connection.
Can this cap be used with soldered pipe systems?
No, this cap is designed exclusively for the Geberit Mapress press-fitting system and is not compatible with soldered connections.
What material is the Geberit Mapress Copper Cap made from?
It is made from high-quality copper, ensuring durability and resistance to corrosion.
How do I ensure a leak-proof seal?
A leak-proof seal is achieved by using the correct Geberit Mapress pressing tool and ensuring the fitting is pressed according to the manufacturer's specifications onto a clean, square-cut pipe end.
What is the warranty period for this product?
Warranty information typically depends on the supplier and specific project terms. It is best to consult with your supplier for details on warranty coverage.
Can I remove and reuse this cap once pressed?
No, once pressed, the Geberit Mapress fitting creates a permanent connection and cannot be removed or reused without damaging the fitting and potentially the pipe.
Troubleshooting
Pressing tool fails to engage or press correctly.
Verify that the correct jaw size for 28mm fittings is being used. Ensure the pipe is fully inserted into the fitting and the tool is properly seated. Check the pressing tool's power source or battery if applicable.
Leak detected after installation.
The leak is likely due to improper pressing. The fitting may need to be removed (if possible and safe to do so) and re-pressed, or the pipe section may need to be replaced. Ensure the pipe end was clean and square before installation.
Difficulty sliding the cap onto the pipe.
Ensure the copper pipe end is clean, free from oxidation, and not deformed. A slight chamfer on the pipe edge can help. Do not force the fitting; if it's too tight, check for any obstructions or pipe damage.
Pros and Cons
Pros
- Provides a strong and reliable seal.
- Constructed from durable copper for long-term performance.
- Facilitates quick and efficient installation within the Geberit Mapress system.
- Reduces the risk of leaks compared to traditional capping methods.
- Offers a professional finish to pipework.
Cons
- Requires specific Geberit Mapress pressing tools for installation.
- Limited to use with 28mm copper pipe sizes.
- Not suitable for systems requiring frequent disconnection and reconnection.
- Potential for higher initial tool investment for those not already in the Mapress system.
Setup, Compatibility & Care
Setup:
- Ensure the 28mm copper pipe end is clean, free from burrs, and cut square.
- Slide the Geberit Mapress Copper Cap onto the end of the copper pipe.
- Using the appropriate Geberit Mapress pressing tool, press the cap onto the pipe according to the tool manufacturer's instructions. Ensure the profile of the pressing jaws matches the fitting.
Compatibility:
- This fitting is designed exclusively for use with the Geberit Mapress system.
- It is compatible with 28mm diameter copper pipes compliant with relevant industry standards.
- Ensure your pressing tool is certified and suitable for Geberit Mapress fittings.
Care:
- Once installed, the fitting requires no routine maintenance.
- Avoid exposing the fitting to abrasive cleaners or materials that could damage the copper surface.