Best current price£16.66from The Range
Shopping.co.uk recommended and popular offers
The Range£16.66Visit shop Thunderbolt All-Purpose Anchors Hexagon Flange Head Zyp - M5 X 75 (Box Of 100) - White
Visit shop20 offers from £16.66 - £44.99
View price history by clicking the chart icon.
The Thunderbolt All-Purpose Anchors M6 X 130 are designed for both professional contractors and DIY enthusiasts who require a heavy-duty, reliable fastening solution for masonry and concrete projects. Their standout benefit is the hexagon flange head, which provides exceptional surface contact and a secure, stable fit that minimizes movement once installed. However, users should note that these specific 130mm anchors require deep-hole drilling, which may necessitate specialized drill bits depending on the substrate material.
| Colour | Gold |
|---|---|
| Model Part Number | M6 X 130 |
| Brand | Thunderbolt |
These are designed for solid concrete or masonry. They will not provide adequate expansion or stability in hollow materials.
Yes, you must drill a pilot hole using a masonry drill bit matching the specified diameter for M6 anchors.
These anchors feature a durable gold-colored plating designed to resist environmental corrosion.
While they offer strong holding power, always check local building codes for overhead or safety-critical structural fastening requirements.
They are designed as permanent fixings, but they can be unscrewed, though this may damage the surrounding masonry surface.
You will need a hammer drill, a masonry drill bit of the correct diameter, a vacuum or brush to clean the hole, and a socket wrench.
The hole is likely too large. Check the drill bit size; if the hole is oversized, you may need to move to a larger anchor or use an epoxy resin filler to stabilize the connection.
This is often caused by over-torquing. Use a manual socket wrench rather than a high-impact driver to better control the final tension.
Installation follows a standard workflow: mark the position, drill a hole through the fixture into the concrete using an appropriately sized masonry bit, clean the debris from the hole using a brush or compressed air, and drive the anchor home using a socket wrench. Because these are M6 anchors, confirm the hole diameter matches the manufacturer's recommendation to prevent loosening over time. Keep the anchors in their original packaging until use to prevent moisture-related corrosion, and store them in a dry, temperate environment to maintain the integrity of the gold coating.
