Deta Double Pole Switch - Black - SD1300PSSB

A double pole switch disconnects both the live and neutral conductors simultaneously, providing a complete isolation of the circuit for increased safety, especially for higher power loads.

While it can be used for lighting, its 50 Amp rating and double pole function are typically overkill for standard lighting circuits. It is better suited for heavy-duty appliance or motor control where full isolation is required.

The maximum current capacity for this switch is 50 Amps.

Typically, the neon indicator is wired internally to illuminate when the switch is closed and the circuit is live. Refer to the wiring diagram provided with the product for specific connections.

The faceplate is made of stainless steel with black inserts.

This switch is designed for indoor electrical installations. It does not have an IP rating for protection against water or dust ingress, so it should not be exposed to environmental elements.

Please refer to the product packaging or Deta's official documentation for specific warranty information, as this can vary.

Verify that the circuit is live and the switch is in the 'ON' position. Ensure the bulb is not burnt out (though often integrated) and that wiring connections are secure and correct for the neon indicator.

Cease operation and have the switch inspected by a qualified electrician. This may indicate an internal fault or improper installation.

Immediately turn off the power to the circuit. Check if the load exceeds the 50 Amp rating. Ensure all connections are tight. If the issue persists, the switch may be faulty or undersized for the application and requires replacement.