Best current price£19.69from eBay
Shopping.co.uk recommended and popular offers
eBay£19.69Visit shop Rubber Door Seal Gasket For LOGIK L914WM20 Washing Machines 42002568 42077485
Visit shop
B&Q£20.39Visit shop B&Q - Rubber Door Seal Gasket For Logik L914Wm20 Washing Machines 42195043
Visit shop2 offers from £19.69 - £20.39
View price history by clicking the chart icon.
This premium rubber door seal gasket by SPARES2GO is designed for owners of the Logik L914WM20 washing machine who are experiencing leaks or wear in their original door seal. It provides a reliable, watertight fit to restore your machine’s efficiency and prevent water from escaping during the cycle; however, the replacement process requires careful attention to the retaining springs and internal alignment to ensure a proper seal.
| Model Part Number | 02-SPB-341 |
|---|---|
| Brand | SPARES2GO |
No, this part is specifically designed for the Logik L914WM20 model and may not fit other brands or models.
A flat-head screwdriver is typically sufficient to pry the retaining clips off and back onto the seal.
Signs of failure include water leaks, visible cracks, mold buildup that cannot be removed, or a bad smell coming from the drum.
Generally, you should reuse your existing factory clips unless they are damaged or rusted.
Use a simple mixture of warm water and mild detergent; avoid harsh chemicals that can degrade the rubber compound.
Yes, ensure the drainage holes in the gasket are positioned at the bottom to allow trapped water to drain properly.
Ensure the gasket is seated evenly around the entire circumference and that the retaining springs are tightened securely.
Check that the gasket is not bunched up or twisted during the installation process.
Ensure the seal lip is fully pulled over the drum metal flange until you hear or feel it snap into the groove.
To install this gasket, first ensure the washing machine is disconnected from the power supply and the water inlet hoses are turned off. You will need a flat-head screwdriver to remove the inner and outer retaining springs (or clips) that hold the seal in place.
For ongoing care, wipe the gasket down with a damp cloth after every wash cycle to remove residue, hair, or small items that could cause tears. Keeping the door slightly ajar when the machine is not in use prevents mold and mildew buildup on the rubber surface.
