Polypipe 110mm Soil 92.5deg Bend Single Socket Grey - SB411G

The 92.5° angle is designed to allow for a change in direction of the soil pipework, facilitating efficient routing of waste and foul odors within residential drainage systems.

Yes, it is compatible with both push-fit ring seal connections and solvent weld installation methods, providing flexibility for installers.

This bend is specifically engineered for residential soil and vent system applications. For commercial use, it's recommended to consult Polypipe's product range for heavy-duty or commercial-grade solutions.

A single socket fitting has one socket end designed to receive the spigot end of a pipe or another fitting, simplifying connections in a drainage run.

For push-fit, ensure the pipe is fully inserted and the rubber seal is intact. For solvent weld, follow the correct surface preparation and application of cement. Using the Polypipe system ensures optimal joint integrity.

The bend is manufactured from durable grey PVC, chosen for its resilience and suitability for drainage applications.

Ensure the pipe is fully inserted into the socket. If push-fit, check the integrity of the rubber seal and re-lubricate if necessary. For solvent weld, ensure the joint was properly fused and consider re-doing the joint if a poor bond is suspected.

Check for obstructions or damage inside the socket. Ensure the pipe spigot is clean and chamfered slightly if needed. Use silicone lubricant for push-fit connections to ease insertion.

While this bend is designed for flow, slow drainage might indicate a blockage further down the line or an issue with system ventilation. Check the entire run of pipework for obstructions or incorrect gradients.