Best current price£14.95from eBay
Shopping.co.uk recommended and popular offers
eBay£14.95Visit shop 1x MIPA ETCH Primer Grey Acid Wash Primer Aerosol 400ML
Visit shop
B&Q£19.99Visit shop B&Q - Etch Primer Spray 400MlFast-Drying Adhesion Promoter
Visit shop3 offers from £14.95 - £19.99
View price history by clicking the chart icon.
The Mipa Etch Primer Spray is designed for automotive technicians, metalworkers, and DIY enthusiasts who require a reliable, high-performance base for non-ferrous metals. Its primary benefit is the promotion of superior adhesion on difficult surfaces like aluminum and zinc, ensuring that topcoats remain durable and professional; however, users must note that it is specifically engineered for solvent-borne systems and requires proper ventilation during application.
| Colour | Green |
|---|---|
| Model Part Number | 213090000 |
| Brand | Mipa |
No, this product is designed specifically for metal surfaces like aluminum, zinc, steel, and iron.
The primer is ready to sand in 30 minutes, after which you can apply your solvent-borne topcoat.
This is a 1K spray product that is compatible with both 1K and 2K solvent-borne coating systems.
Yes, it promotes strong adhesion which helps prevent corrosion on metal surfaces by sealing them beneath a durable coating.
Only if there is significant airflow and ventilation, though it is highly recommended to use in a ventilated spray booth or outdoors.
Ensure the metal was properly cleaned and degreased before application. If contamination persists, sand the area and re-apply.
Clear the nozzle by holding the can upside down and pressing the nozzle until only propellant comes out.
Verify that your topcoat is a solvent-borne 1K or 2K system and ensure the primer was fully cured before top-coating.
Before application, ensure that the metal surface is completely free of grease, oil, and loose debris, as cleanliness is critical for the etch chemical reaction to bond properly. Shake the spray can vigorously for at least two minutes before use to ensure the contents are mixed correctly. Apply the spray at a consistent distance of 15–20 cm in a side-to-side motion. This product is compatible with all solvent-borne 1K and 2K systems. After use, clear the nozzle by turning the can upside down and spraying for a few seconds to prevent clogs. Store in a cool, dry place away from direct sunlight.
