Craft Resin Crystal Clear Deep Pour Epoxy Resin Kit - 1.5L

The working time is approximately 45-60 minutes, allowing ample time for mixing, coloring, and pouring, especially for larger projects.

While designed for deep pours, it can be used for thinner layers, but its self-leveling and bubble-release properties are most beneficial in thicker applications.

Yes, the 1.5L kit includes 1L of clear resin and 0.5L of hardener, following the 2:1 ratio.

The resin cures to a hard, scratch-resistant state in approximately 48 hours. Full hardness and optimal strength may take 3-7 days depending on conditions.

Yes, you can use epoxy resin-specific pigments, mica powders, and dyes. Add them after mixing the resin and hardener, and mix thoroughly.

This deep pour formula is designed for single-layer pours of up to 2 inches thick.

Store in their original, tightly sealed containers in a cool, dry place away from direct sunlight. Ensure the caps are securely fastened to prevent moisture absorption and degradation.

Ensure the 2:1 ratio was strictly followed, and the resin was mixed thoroughly for the recommended time. Check room temperature; it should be between 70-77°F (21-25°C). Curing may take longer in cooler temperatures.

The upgraded formula releases bubbles well, but ensure resin is slightly warm before mixing (e.g., place bottles in warm water). Mix slowly and deliberately to avoid introducing new air. Allow mixed resin to sit for a few minutes before pouring; this helps bubbles rise.

Ensure surfaces are clean and free of dust before pouring. Avoid disturbing the resin while it cures. For minor surface issues after curing, light sanding and applying a thin flood coat may resolve it.

While formulated to be non-yellowing, prolonged exposure to direct UV light can accelerate yellowing. Apply a UV-resistant top coat or keep finished pieces out of direct sunlight.