Best current price£4.08from City Plumbing GB
Shopping.co.uk recommended and popular offers
City Plumbing GB£4.08Visit shop Pegler Kuterlite Compression 610 15Mm Coupling 61017K
Visit shop1 offer from £4.08
View price history by clicking the chart icon.
The Pegler Kuterlite 610 Coupling is designed for professional plumbers and experienced DIYers seeking a robust mechanical joint for plumbing systems. Its primary benefit is the integrated olive system, which creates a secure, leak-free seal without the need for heat or soldering. One important caveat is that users must ensure the pipe ends are perfectly square and free of burrs to guarantee the integrity of the compression seal.
| Model Part Number | 61017K |
|---|---|
| Brand | Pegler |
Always check local building codes. While high quality, compression fittings for gas require specific standards; ensure your installation complies with local gas safety regulations.
While the body can be reused, it is highly recommended to replace the olive if the fitting has been fully tightened previously to ensure a perfect new seal.
The Kuterlite 610 is compatible with polyethylene pipe, but a pipe insert must be used to support the wall of the plastic pipe during compression.
The fitting is designed for standard domestic water and heating pressure systems. Refer to the product technical data sheet for specific pressure-temperature ratings.
No, the Kuterlite compression fitting is designed to create a metal-to-metal seal between the olive and the pipe/fitting without the need for additional sealants.
Tighten the nut an additional quarter turn. If it continues to leak, disassemble, check for debris on the olive, and ensure the pipe end is not scored or damaged.
Ensure threads are clean. You may use a light application of silicone-based lubricant on the threads to ease the process, but never apply lubricant to the olive/pipe interface.
The fitting may not be fully tightened or the pipe diameter is incorrect. Verify the pipe size matches the 15mm specification.
Regular maintenance involves checking for weeping joints after the initial system pressurization. No special chemical maintenance is required, provided the system is treated with standard corrosion inhibitors.
