Best current price£0.15from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£0.15Visit shop TruConnect 211866 7.62mm 3 Way 15A 300V Header Right Angle Side En...
Visit shop17 offers from £0.15 - £1.84
View price history by clicking the chart icon.
This guide is for engineers and technicians requiring reliable electrical connections. The TruConnect 211869 terminal block offers a secure and straightforward method for connecting wires with its right-angle side entry and open-ended design. A key consideration is its specific pitch and pole count, which must match project requirements.
| Model Part Number | 211869 |
|---|---|
| Brand | TruConnect |
The pitch of the TruConnect 211869 terminal block is 7.62mm.
This terminal block is rated for a maximum of 15A and 300V.
'Open ended' refers to the terminal design where wires can be inserted directly without needing to be pre-crimped onto a pin. This simplifies the termination process.
No, this is a header connector. It requires a compatible receptacle to form a complete connection for your wires.
A right-angle side entry allows cables to exit the connector perpendicular to the mounting surface, which is ideal for applications with limited vertical space or when neat cable management is desired.
This header has 6 poles, meaning it provides 6 individual connection points for wires.
The product information does not specify environmental ratings for outdoor use. It is generally recommended for indoor applications unless specifically rated otherwise and properly protected.
Ensure wires are fully inserted and properly stripped. Verify that the mating receptacle is securely attached to the header and that it is the correct 7.62mm pitch compatible part. Check for any damage to the header pins or receptacle contacts.
Confirm that the connected wires and the load do not exceed the 15A rating. Ensure good contact integrity. If the issue persists, the application might require a terminal block with a higher current rating.
Ensure the wire ends are neatly stripped and not frayed. The terminal block is designed for specific wire gauges; check compatibility. Do not force wires; they should slide in with moderate pressure.
Setup: To use the TruConnect 211869, strip the wire ends to the appropriate length (refer to connector documentation for exact stripping length) and insert them into the open-ended terminals. Ensure the wires are fully seated. This header requires a compatible receptacle (sold separately) for a complete circuit. Connect the receptacle to the header, ensuring a firm and secure mating.
Compatibility: This terminal block is designed to mate with corresponding 7.62mm pitch receptacles. Always verify that the receptacle's specifications (current, voltage, pole count) match those of the header (211869) and your application's requirements.
Care: Keep the terminal block clean and free from dust and debris. Avoid exposure to excessive moisture or corrosive substances. When disconnecting, gently pull the receptacle away from the header; avoid pulling on the wires.
